Post your 3 pictures for the February Model of the Month competition HERE.
Post your, single, picture for voting purposes
HERE
Rules for the new Model of the Month. Please read before posting
1. Entries must be of your own work.
2. The model must be of an aircraft.
3. The model can be in any scale and in any medium.
4. The model can be “out of the box”, scratch built, or anything in between.
5. The model must be finished within the month for which it is entered. The model could have been started some time before the MOM for which it is entered, it is the month in which it is actually finished that counts. So if it isn't finished this month it may be ready for next month or the month after
6. 1 picture is to be uploaded into the relevant gallery and titled with what the model is of, I.E. VS Spitfire Mk Vc. No composites. This picture must be of just the model, no base. (For a model posed in the "in Flight" configuration" a small stand is allowed which can be used to either support the model or as a counter weight. A beaching dolly can be used for a float plane.
7. A thread will be opened in the general aircraft forum in which you MUST add up to 3 further pictures and you MAY add details about the build. The model can appear on a base or even in a diorama in this thread. Pictures must not be larger than 700 pixels wide, in either the gallery or the information thread. If you wish to post further pictures then open your own thread.
8. Pictures of models can be placed in the gallery from the first of the month until the penultimate day of the month (the next to last day) (see “5” above). (This is to avoid the time zone difference, I'm working on GMT)
9. Voting will take place over the first half of the next month, closing on the 16th. (This will be between 18.00 and 00.01 GMT)
10. A member winning one month cannot win the following month.
11. Dragon are sponsoring this from June 2007.
12. Staff members of the Kitmaker group of sites cannot enter.
13. The rules will be added to when and if it is deemed necessary.
14. Any none complience with these rules may result in disqualification.
15. Ignorance of these rules is not an excuse for not abiding by them.
Hosted by Jim Starkweather
Feb 2009 Model of the Month (MoM) contest
Posted: Wednesday, February 18, 2009 - 06:47 AM UTC
This post was removed.
Siderius
Tennessee, United States
Joined: September 20, 2005
KitMaker: 1,747 posts
AeroScale: 1,673 posts
Joined: September 20, 2005
KitMaker: 1,747 posts
AeroScale: 1,673 posts
Posted: Wednesday, February 18, 2009 - 03:43 PM UTC
This is my model of the month entry. This the Academy 1/72 scale Me-109G built out of the box.
It is decaled with aftermarket decals, I am never sure about how Academy decals will do though I hear they are trying to improve them.
The aircraft is painted with Polly Scale acrylic colors. RLM 74/75 splinter camoflage on top, with RLM 76 on the bottom. Pretty standard color scheme.
Removed by original poster on 02/19/09 - 16:55:23 (GMT).
modelguy2
Ohio, United States
Joined: March 09, 2002
KitMaker: 818 posts
AeroScale: 137 posts
Joined: March 09, 2002
KitMaker: 818 posts
AeroScale: 137 posts
Posted: Thursday, February 19, 2009 - 10:56 AM UTC
Eduard 1/48 Albatros DVa
JollyRoger
Istanbul, Turkey / Türkçe
Joined: December 22, 2004
KitMaker: 1,241 posts
AeroScale: 616 posts
Joined: December 22, 2004
KitMaker: 1,241 posts
AeroScale: 616 posts
Posted: Monday, February 23, 2009 - 02:35 AM UTC
There we go. Revell B&V P.194 in 1/72
This post was removed.
This post was removed.
Kamikaze74
Setubal, Portugal
Joined: March 15, 2007
KitMaker: -36 posts
AeroScale: 0 posts
Joined: March 15, 2007
KitMaker: -36 posts
AeroScale: 0 posts
Posted: Monday, February 23, 2009 - 12:48 PM UTC
This is my Fujimi 1/72 OOB Kugisho D4Y1 Suisei "Judy"
This post was removed.
This post was removed.
This post was removed.
This post was removed.
This post was removed.
This post was removed.
This post was removed.
This post was removed.
PolarBear
Västra Götaland, Sweden
Joined: February 23, 2005
KitMaker: 820 posts
AeroScale: 629 posts
Joined: February 23, 2005
KitMaker: 820 posts
AeroScale: 629 posts
Posted: Wednesday, February 25, 2009 - 03:22 AM UTC
1/72 Dassault Mirage IIICJR "Tzniut" recconaissance version, IAF, late 70's, OOB AML kit
Cheers! // PolarBear
magnusf
Stockholm, Sweden
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Joined: May 02, 2006
KitMaker: 1,953 posts
AeroScale: 1,902 posts
Posted: Wednesday, February 25, 2009 - 09:23 PM UTC
1/72 Arado 234C-4 from Dragon.
Magnus
Magnus
chukw1
California, United States
Joined: November 28, 2007
KitMaker: 817 posts
AeroScale: 729 posts
Joined: November 28, 2007
KitMaker: 817 posts
AeroScale: 729 posts
Posted: Thursday, February 26, 2009 - 07:15 AM UTC
Here goes- I can't seem to access the single-pic-for-voting gallery- can I get some help, please?
This is the Accurate Miniatures/ProModeler SB2C-4 in 1/48 scale, updated to -4E specs. Additions to the kit include resin from True Details and Ultracast, PE from Eduard, plus lots of scratchbuilding. An in-depth build log begins here: https://aeroscale.kitmaker.net/forums/109919&page=1
This is the Accurate Miniatures/ProModeler SB2C-4 in 1/48 scale, updated to -4E specs. Additions to the kit include resin from True Details and Ultracast, PE from Eduard, plus lots of scratchbuilding. An in-depth build log begins here: https://aeroscale.kitmaker.net/forums/109919&page=1
ludovik
Jihormoravsky Kraj, Czech Republic
Joined: February 14, 2008
KitMaker: 10 posts
AeroScale: 9 posts
Joined: February 14, 2008
KitMaker: 10 posts
AeroScale: 9 posts
Posted: Saturday, February 28, 2009 - 11:05 AM UTC
My contribution to the MoM is 1/48 scale Ishak from Eduard. Some minor changes are made to improve the overall look:
- the top of the fin is sanded down
- trailing edges of the wings are thinned
- the front engine cowling shortened cca 1mm
- landing gear legs shortened cca 3mm
- a few riveting lines added
Used camouflage colours: WEM enamels
- the top of the fin is sanded down
- trailing edges of the wings are thinned
- the front engine cowling shortened cca 1mm
- landing gear legs shortened cca 3mm
- a few riveting lines added
Used camouflage colours: WEM enamels
DaveCox
England - South East, United Kingdom
Joined: January 11, 2003
KitMaker: 4,307 posts
AeroScale: 272 posts
Joined: January 11, 2003
KitMaker: 4,307 posts
AeroScale: 272 posts
Posted: Monday, March 02, 2009 - 07:48 AM UTC
P47 Thunderbolt II, SEAC