_GOTOBOTTOM
Early Aviation
Discuss World War I and the early years of aviation thru 1934.
Hosted by Jim Starkweather
Etch for albatros
Repainted
_VISITCOMMUNITY
Östergötland, Sweden
Joined: April 04, 2006
KitMaker: 1,058 posts
AeroScale: 1,004 posts
Posted: Wednesday, March 04, 2009 - 05:27 AM UTC
jadar have Parts new etch for Rodens Albatros DIII 32-scale.God news for anyone who´s in for this kits








Prize 11 Euro

Check in www. jadar.pl



Larsa Q
Repainted
_VISITCOMMUNITY
Östergötland, Sweden
Joined: April 04, 2006
KitMaker: 1,058 posts
AeroScale: 1,004 posts
Posted: Wednesday, March 04, 2009 - 05:29 AM UTC
Keith
Hold you´r horses, you just started a build here.





Larsa Q
Repainted
_VISITCOMMUNITY
Östergötland, Sweden
Joined: April 04, 2006
KitMaker: 1,058 posts
AeroScale: 1,004 posts
Posted: Wednesday, March 04, 2009 - 05:35 AM UTC
almost missed this one.


Oh happy days. Even etch for the D1 kit.
the bad thing is just that I´ve have already done them

Larsa Q
Kornbeef
_VISITCOMMUNITY
England - South East, United Kingdom
Joined: November 06, 2005
KitMaker: 1,667 posts
AeroScale: 1,551 posts
Posted: Wednesday, March 04, 2009 - 07:41 PM UTC
Whoooooaaaaaaah Boys....... reins the team in. If only they had announced this earlier

But its a got to have...

Thanks fpr posting it Lars...Can I go to Jadar's website and just buy this or will I end up with a large order again

It kinda makes Eduards set look less appealing I have to say.

Thanks for Posting Lars...
Kornbeef
_VISITCOMMUNITY
England - South East, United Kingdom
Joined: November 06, 2005
KitMaker: 1,667 posts
AeroScale: 1,551 posts
Posted: Thursday, March 05, 2009 - 12:44 AM UTC
Ordered 2 sets of each.....to ease my Albi fetish.........I want to get another DI and mod it to DII spec.

RAGIII
_VISITCOMMUNITY
North Carolina, United States
Joined: June 19, 2007
KitMaker: 604 posts
AeroScale: 600 posts
Posted: Thursday, March 05, 2009 - 12:06 PM UTC

Quoted Text

almost missed this one.


Oh happy days. Even etch for the D1 kit.
the bad thing is just that I´ve have already done them

Larsa Q


Same here, Well almost, the D1 is very close!
RAGIII
mgtaylor
_VISITCOMMUNITY
Florida, United States
Joined: July 20, 2006
KitMaker: 59 posts
AeroScale: 56 posts
Posted: Thursday, March 05, 2009 - 02:17 PM UTC
WHOOOUPPPS !! Hold the Presses !!

THIS IS GREAT NEWS !!

AND I WAS JUST Looking at thier SIte the Other Day WOndering IF anything NEW Was OUT ?

LArs Q Question ? Does Derek of Jadar Listen to You ?

I try but I do not think I get thru to him as american ? Will you please pass on to him a request from ALL AMERICAN WWI Large Scale Builders to PLEASE UPSCALE ALL OF PART's 48th Scale WWI Sets to 1/32 Scale for ALL the WWI Kits that are now in 32nd like the Nie 11 and SPAD VII and soon will be Ie the DH2 and SSW D.III ?

I will do the same but I think he may listen more to you ?

I guess I will have to make a NEW PART WHOLESALE ORDER NOW instead of Later ?

I am in the Middle of an Encore/Roden Alb D.II/I Build right now ? I guess it will have to go on hold for a few weeks until I can get these !!

Yours MIke

Yours MIke
Kornbeef
_VISITCOMMUNITY
England - South East, United Kingdom
Joined: November 06, 2005
KitMaker: 1,667 posts
AeroScale: 1,551 posts
Posted: Thursday, March 05, 2009 - 08:46 PM UTC
Pity but on the DI set it doesnt cure the blank rears to the windhoff rads...I had hoped when I say them included it would....

I'm still trying to source fine mesh/plate to represent the rear sides of the rads. Any ideas anyone?
mgtaylor
_VISITCOMMUNITY
Florida, United States
Joined: July 20, 2006
KitMaker: 59 posts
AeroScale: 56 posts
Posted: Thursday, March 05, 2009 - 11:18 PM UTC
Yes I have some Fine Brass Mesh which will DO the Job Perfectly I think. I just need a super Sharp New Heavy BLade to cut it without destorying it .

It is a 6-8 inch long 2 inch wide Brass mesh which comes in several varying hole sizes from a diamond grid pattern down to the tiny hole mesh I have.

They are made by K&S and ought to be in your Local Hobby Store alnog with the Metal sheets/tubes and wires ?

http://www.ksmetals.com/products.html


I thought the PART Raditor looked as if it folded all the way around ? It dosent ? It certainly has a nice front and very deleicte looking side ?

Yours MIke
Kornbeef
_VISITCOMMUNITY
England - South East, United Kingdom
Joined: November 06, 2005
KitMaker: 1,667 posts
AeroScale: 1,551 posts
Posted: Friday, March 06, 2009 - 01:08 AM UTC
yes it folds all the way but there doesnt seem to be detail on the rear looking at the pic above...time will tell though when it falls into my mitts

TY for the link to the mesh Michael.
JackFlash
_VISITCOMMUNITY
Colorado, United States
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Posted: Friday, March 06, 2009 - 04:37 AM UTC

Quoted Text

almost missed this one.


Oh happy days. Even etch for the D1 kit.
the bad thing is just that I´ve have already done them

Larsa Q


So you will do another?
Repainted
_VISITCOMMUNITY
Östergötland, Sweden
Joined: April 04, 2006
KitMaker: 1,058 posts
AeroScale: 1,004 posts
Posted: Friday, March 06, 2009 - 06:26 AM UTC

Quoted Text


Quoted Text

almost missed this one.


Oh happy days. Even etch for the D1 kit.
the bad thing is just that I´ve have already done them

Larsa Q


So you will do another?


Hi Stephen
NO, I will not enter the Albtrostrench again, only if a Dv will appear on the market in plastic.
This is just good news for all others who want too start up a build off these kits.



Larsa Q
Repainted
_VISITCOMMUNITY
Östergötland, Sweden
Joined: April 04, 2006
KitMaker: 1,058 posts
AeroScale: 1,004 posts
Posted: Friday, March 06, 2009 - 06:31 AM UTC

Quoted Text

WHOOOUPPPS !! Hold the Presses !!

THIS IS GREAT NEWS !!

AND I WAS JUST Looking at thier SIte the Other Day WOndering IF anything NEW Was OUT ?

LArs Q Question ? Does Derek of Jadar Listen to You ?

I try but I do not think I get thru to him as american ? Will you please pass on to him a request from ALL AMERICAN WWI Large Scale Builders to PLEASE UPSCALE ALL OF PART's 48th Scale WWI Sets to 1/32 Scale for ALL the WWI Kits that are now in 32nd like the Nie 11 and SPAD VII and soon will be Ie the DH2 and SSW D.III ?

I will do the same but I think he may listen more to you ?

I guess I will have to make a NEW PART WHOLESALE ORDER NOW instead of Later ?

I am in the Middle of an Encore/Roden Alb D.II/I Build right now ? I guess it will have to go on hold for a few weeks until I can get these !!

Yours MIke

Yours MIke


Hi Mike
I don’t know if Derek is listen too me, but I usually droops Parts mail for something’s I want to see on the market. Off all mail I sent them they never replied anything, but hoping that they read the mails I still sending them. So If you and I send them there will be two customers with the same wishes.
I mail them tonight.




Larsa Q
MikeM
_VISITCOMMUNITY
Wales, United Kingdom
Joined: December 31, 2004
KitMaker: 219 posts
AeroScale: 28 posts
Posted: Friday, March 06, 2009 - 10:22 PM UTC
Keith
Try http://www.little-cars.co.uk/ they do a range of fine meshes which I'm sure will meet your requirements. The coloured brass wire is also a great product.

Mike
Kornbeef
_VISITCOMMUNITY
England - South East, United Kingdom
Joined: November 06, 2005
KitMaker: 1,667 posts
AeroScale: 1,551 posts
Posted: Saturday, March 07, 2009 - 12:15 AM UTC

Quoted Text

Keith
Try http://www.little-cars.co.uk/ they do a range of fine meshes which I'm sure will meet your requirements. The coloured brass wire is also a great product.

Mike

Thanks Mike....two searches concluded in one I was beginning to hunt for wire too, my little stock has dwindled to almost naught.

Many thanks
Keith
CaptainA
_VISITCOMMUNITY
Indiana, United States
Joined: May 14, 2007
KitMaker: 3,117 posts
AeroScale: 2,270 posts
Posted: Saturday, March 07, 2009 - 10:19 AM UTC
Well, I, for one, have a closet full of large Albatri in my closet. I think these sets might make it into my next Albatros.

I am also waiting for a D.V. I am hopeful that one day, my closet will hold a few of them.
 _GOTOTOP