_GOTOBOTTOM
Early Aviation
Discuss World War I and the early years of aviation thru 1934.
Where to place the decal ? Snipe
bigal07
_VISITCOMMUNITY
England - East Anglia, United Kingdom
Joined: January 07, 2009
KitMaker: 887 posts
AeroScale: 31 posts
Posted: Saturday, October 16, 2010 - 11:10 PM UTC
Hello there - just one more question, the pix below showing the black decals, although obviously from the same kit, the instructions do not show you where these decals actually go - the 2 black stars perhaps on top of the wing, the 2 black spade maybe on the body, I really would like some help if possible. Thank you.
toko128dec
JackFlash
_VISITCOMMUNITY
Colorado, United States
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Posted: Sunday, October 17, 2010 - 12:29 PM UTC
Greeting Alec,

Your markings are for a Sopwith Snipe of the 1st Soviet Fighter Aviaotryad 1920. Pilot was Georgi Stepanovich Sapozhnikov, who died in this aircraft on 8 September 1920 in a flying accident. Plywood fuselage is overpainted medium grey.

In white on the rear of the grey decking on starboard side above the spade symbol is the name "Nelly".

The star was probably only on the undersurface of the lower wings only. The top wing British Cockades may have overpainted. Stars on thwe top wing are equally possible. But your set does not provide for that.

The Ace of Spades is the personal marking and is centered below the break in the upper decking and the fabric covered spine on the fuselage side.

The curved arrow is the unit insignia. It is on the rudder and parallel to the rear curve of the rudder and about 1/8 of an inch away from this edge in 1:72. The rudder may have been overpainted a dirty white or just clear doped linen.

See; "Soviet Air Force markings 1917 -1923 1/72 decals" by Blue Rider. They may have this set on their website. It is from 1987.
bigal07
_VISITCOMMUNITY
England - East Anglia, United Kingdom
Joined: January 07, 2009
KitMaker: 887 posts
AeroScale: 31 posts
Posted: Sunday, October 17, 2010 - 07:19 PM UTC
Amazing information, many thanks.
 _GOTOTOP