New HGW product - Wood decals - sets for the particular kits or free panels.
Example of set:
Other produced options:
532007 Albatros D.V / D.Va TRANSPARENT (WNW 1/32)
532008 Albatros D.V / D.Va BASE WHITE (WNW 1/32)
532010 Albatros D.V / D.Va TRANSPARENT (WNW 1/32)
548009 Albatros D.III OEFFAG 1/48 - TRANSPARENT
548010 Albatros D.III OEFFAG 1/48 - BASE WHITE
Free panels:
INSTRUCTIONS (base white)
Pasted/fixed/glued, puttied and polished model paint by base white (it is suitable to polish also this coloured layer before applying wooden decals). The decals are not transparent, so colour of the decal will be same after its application. Then cut required shape of panel (with 2 mm overlap) and apply as same as ordinary decal (use Mr. Mark Setter, Mr. Mark Softer). After these processes cut protruded wooden decal with very sharp knife.
INSTRUCTIONS (transparent)
Pasted/fixed/glued, puttied and polished model paint by base white (it is suitable to polish also this coloured layer before applying wooden decals). The decals are transparent, so it is necessary to apply base colour. It is possibe to mark off single panels by using different shades of base colour (white, of white, yellow). Then cut required shape of panel (with 2 mm overlap) and apply as same as ordinary decal (use Mr. Mark Setter, Mr. Mark Softer). After these processes cut protruded wooden decal with very sharp knife.
By this technique it is possible to create very believable imitation of the wooden surface without skill in using of oil paints. Finally it takes cca 4 hours to cover whole fuselage of Albatros D.Va (1/32 WNW).
Produced options:
532001 Light Wood/Natural - transparent
532002 Light Wood/Yellow - transparent
532003 Light Wood/Red - transparent
532004 Light Wood/Natural - BASE WHITE
532005 Light Wood/Yellow - BASE WHITE
532006 Light Wood/Red - BASE WHITE
532009 Dark Wood - transparent
532011 PINE TREE (BOROVICE) - TRANSPARENT
532012 PINE TREE (BOROVICE) - TRANSPARENT
532013 PINE TREE (BOROVICE) - TRANSPARENT
548001 PINE TREE (BOROVICE) - TRANSPARENT 1/48
548002 PINE TREE (BOROVICE) - TRANSPARENT 1/48
548003 PINE TREE (BOROVICE) - TRANSPARENT 1/48
548004 PINE TREE (BOROVICE) - BASE WHITE 1/48
548005 PINE TREE (BOROVICE) - BASE WHITE 1/48
548006 PINE TREE (BOROVICE) - BASE WHITE 1/48
548007 DARK WOOD - TRANSPARENT 1/48
548008 DARK WOOD - BASE WHITE 1/48
You can buy:
Ebay: http://shop.ebay.co.uk/uh_bobek/m.html?_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686
e-shop: http://www.battlefield.eshop-zdarma.cz/index.php?category_id=51
or just send an email: [email protected]
Enjoy.
Early Aviation
Discuss World War I and the early years of aviation thru 1934.
Discuss World War I and the early years of aviation thru 1934.
Hosted by Jim Starkweather
HGW Wood Decals - Albatros D.III Oeffag
hgwczech
Severocesky Kraj, Czech Republic
Joined: February 20, 2010
KitMaker: 97 posts
AeroScale: 94 posts
Joined: February 20, 2010
KitMaker: 97 posts
AeroScale: 94 posts
Posted: Sunday, May 15, 2011 - 11:49 PM UTC
JackFlash
Colorado, United States
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Posted: Saturday, November 05, 2011 - 02:42 PM UTC
Mine arrived today.
548017 Albatros D.V / D.Va Light Wood/Natural - transparent 1/48
548016 Albatros D.V / D.Va Light Wood/Natural - BASE WHITE 1/48
548009 Albatros D.III OEFFAG transparent 1/48
548010 Albatros D.III OEFFAG Base white1/48
Here you go with a review.
Here is is without any dulling down. From the factory floor lets do the roll out.
548017 Albatros D.V / D.Va Light Wood/Natural - transparent 1/48
548016 Albatros D.V / D.Va Light Wood/Natural - BASE WHITE 1/48
548009 Albatros D.III OEFFAG transparent 1/48
548010 Albatros D.III OEFFAG Base white1/48
Here you go with a review.
Here is is without any dulling down. From the factory floor lets do the roll out.