_GOTOBOTTOM
Early Aviation
Discuss World War I and the early years of aviation thru 1934.
Am asking for some help
maxmwill
_VISITCOMMUNITY
Alabama, United States
Joined: August 24, 2011
KitMaker: 334 posts
AeroScale: 291 posts
Posted: Monday, June 13, 2016 - 11:21 PM UTC
I have been thinking of a possible diorama, but was coming up short in ideas, until I saw an engine kit, the 1/32 Roden Hispano Suiza 8Ab, and was intrigued. I didn't know much about it, save that it had potential(which kit does not?), and so began researching it. I found that the only aircraft to have this was the SPAD 7, and that there are a number of kits of this available in 1/32.

But, I didn't want to build the SPAD as a flying machine, but as a hangar queen, one of the unfortunate flying machines which sit in the back of the shop, used for spare parts. Besides which, I'm weak when it comes to rigging, and figured this'd be a nice way to "cheat".

But, as I have found plenty of photos of the SPAD in all its glory, I have found none which would show it with even the cowling off, let alone stripped and in the back of a hangar.

And so I'm asking, before I continue, if there are any photos extant which show the SPAD in various stages of being stripped for parts.
Jessie_C
_VISITCOMMUNITY
British Columbia, Canada
Joined: September 03, 2009
KitMaker: 6,965 posts
AeroScale: 6,247 posts
Posted: Monday, June 13, 2016 - 11:31 PM UTC
Here are pictures of the engine installation:



They're from this page which has links to 170 others from the restoration.
maxmwill
_VISITCOMMUNITY
Alabama, United States
Joined: August 24, 2011
KitMaker: 334 posts
AeroScale: 291 posts
Posted: Tuesday, June 14, 2016 - 12:16 AM UTC
Thank you. However, what I have in mind is a bit more extensive than that, sitting in the back of the hangar, with wings off, and the engine off the mount, looking very much like a sad end to a fighting flying machine.
Removed by original poster on 06/14/16 - 20:53:16 (GMT).
JackFlash
_VISITCOMMUNITY
Colorado, United States
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Posted: Tuesday, June 14, 2016 - 02:34 AM UTC
Here is a bit I did on the Spad XIII. The Hispano Suiza used was the 200-220hp version. Unfortunately many of the image links are broken. I will add a few here.

[url=https://aeroscale.kitmaker.net/forums/92419&page=1Hangar Queen[/url]



JackFlash
_VISITCOMMUNITY
Colorado, United States
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Posted: Tuesday, June 14, 2016 - 02:44 AM UTC




Review Roden S.VII French

Review Roden S.VII American pilots

Review Eduard PE for Roden Spad S.VII
JackFlash
_VISITCOMMUNITY
Colorado, United States
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Posted: Tuesday, June 14, 2016 - 02:51 AM UTC
Recently I did a review here on "The Grim Reapers" Escadeille 94. They had S.VII types at one time.

Grim Reapers here.

Hope this helps.
maxmwill
_VISITCOMMUNITY
Alabama, United States
Joined: August 24, 2011
KitMaker: 334 posts
AeroScale: 291 posts
Posted: Tuesday, June 14, 2016 - 02:51 AM UTC
Those are more along the line of what I have in mind. Are there any photos of the 7 in a hangar, by itself?
JackFlash
_VISITCOMMUNITY
Colorado, United States
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Posted: Tuesday, June 14, 2016 - 02:59 AM UTC
There are some books on the Spad VII you might try.

Also the early SE 5 used the 150-170 hp Hispano - Suiza.
maxmwill
_VISITCOMMUNITY
Alabama, United States
Joined: August 24, 2011
KitMaker: 334 posts
AeroScale: 291 posts
Posted: Tuesday, June 14, 2016 - 03:08 AM UTC
Thanks for the link. It does help.
Jessie_C
_VISITCOMMUNITY
British Columbia, Canada
Joined: September 03, 2009
KitMaker: 6,965 posts
AeroScale: 6,247 posts
Posted: Tuesday, June 14, 2016 - 06:57 AM UTC

Quoted Text

Thank you. However, what I have in mind is a bit more extensive than that, sitting in the back of the hangar, with wings off, and the engine off the mount, looking very much like a sad end to a fighting flying machine.



Well if you follow the link which talks about the 170 pictures, eventually you can get to these:





JackFlash
_VISITCOMMUNITY
Colorado, United States
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Posted: Tuesday, June 14, 2016 - 05:20 PM UTC
Nice!
Jessie_C
_VISITCOMMUNITY
British Columbia, Canada
Joined: September 03, 2009
KitMaker: 6,965 posts
AeroScale: 6,247 posts
Posted: Tuesday, June 14, 2016 - 07:46 PM UTC

Quoted Text

Nice!



I wonder what's up with that red fuselage in the background? It looks like something interesting.
JackFlash
_VISITCOMMUNITY
Colorado, United States
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Posted: Wednesday, June 15, 2016 - 08:04 AM UTC

Quoted Text


Quoted Text

Nice!



I wonder what's up with that red fuselage in the background? It looks like something interesting.



Hey Ms Jessica, It looks like a Spad S.XVI or a variation of the S.XI?
Jessie_C
_VISITCOMMUNITY
British Columbia, Canada
Joined: September 03, 2009
KitMaker: 6,965 posts
AeroScale: 6,247 posts
Posted: Wednesday, June 15, 2016 - 12:11 PM UTC
If it is, it's been modified, judging by that slab-sided fairing around and behind the cabane struts. It looks as though it's a special record-breaker with that paint job.

EDIT: Aha! I found it! It's the Breguet 19 Super Bidon "Point d'Interrogation".
JackFlash
_VISITCOMMUNITY
Colorado, United States
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Posted: Wednesday, June 15, 2016 - 05:20 PM UTC
Excellent!
CaptnTommy
_VISITCOMMUNITY
Connecticut, United States
Joined: October 26, 2009
KitMaker: 424 posts
AeroScale: 389 posts
Posted: Wednesday, June 15, 2016 - 09:35 PM UTC
Nice Idea you have. In New York state there Is Reinbeck Aerodrome a flying museum with a Spad, they have a weekend airshow during the summer. You can get up close and personal with a Spad.

I am sorry I do not know of any museum close to you with a s SPAD.

Captn Tommy
 _GOTOTOP