Hi all....
Some fell on stony ground...
Was it something I said...???...lol
After posting 2 progress reports
( Ar TEW 16 on 13th March a.m. and He 343 cockpit on 15th a.m.) and gaining only one reply (Thanks Sidney) I imagine the lack of response is due to:
1. Not many are familiar with the subject and therefore feel unable to comment...or
2. The work is crap and you are all too kind to say so....or
3. Both.
How else can I learn?
Or am I cursed to be alone??
(Sniffle...snertch and sob)
I’m the one in the dark corner of the cyber bar drowning his sorrows....“another please barman and make it a triple straight....”
They don’t write posts like this anymore....
Thanks and Cheers
Peter
General Aircraft
This forum is for general aircraft modelling discussions.
This forum is for general aircraft modelling discussions.
Hosted by Jim Starkweather
“Rallying point...
flitzer
England - North West, United Kingdom
Joined: November 13, 2003
KitMaker: 2,240 posts
AeroScale: 743 posts
Joined: November 13, 2003
KitMaker: 2,240 posts
AeroScale: 743 posts
Posted: Monday, March 15, 2004 - 07:51 PM UTC
brandydoguk
England - North, United Kingdom
Joined: October 04, 2002
KitMaker: 1,495 posts
AeroScale: 643 posts
Joined: October 04, 2002
KitMaker: 1,495 posts
AeroScale: 643 posts
Posted: Monday, March 15, 2004 - 11:22 PM UTC
Hi Peter, I saw both posts. The reason for not posting a reply was:
1. I'm unfamiliar with the subject
2. Your work is a better quality than anything I produce so I don't feel qualified to post constructive criticism comments [other than "looking good" etc which is stating the obvious and doesn't really give any decent feedback.]
I will send a round over to your dark corner of the cyber bar :-)
1. I'm unfamiliar with the subject
2. Your work is a better quality than anything I produce so I don't feel qualified to post constructive criticism comments [other than "looking good" etc which is stating the obvious and doesn't really give any decent feedback.]
I will send a round over to your dark corner of the cyber bar :-)
flitzer
England - North West, United Kingdom
Joined: November 13, 2003
KitMaker: 2,240 posts
AeroScale: 743 posts
Joined: November 13, 2003
KitMaker: 2,240 posts
AeroScale: 743 posts
Posted: Monday, March 15, 2004 - 11:44 PM UTC
Hi Martin...Thanks for the kind words.
But I find your work of the highest order...in fact your articles will be my guide when I get to painting and applying the future.
Thanks again...don't feel quite so lonely now :-) :-)
Cheers
Peter
:-)
But I find your work of the highest order...in fact your articles will be my guide when I get to painting and applying the future.
Thanks again...don't feel quite so lonely now :-) :-)
Cheers
Peter
:-)
antoniazzip
Aragua, Venezuela
Joined: November 13, 2002
KitMaker: 158 posts
AeroScale: 0 posts
Joined: November 13, 2002
KitMaker: 158 posts
AeroScale: 0 posts
Posted: Tuesday, March 16, 2004 - 12:52 AM UTC
Friend Peter greetings, salt of that dark corner and I apologize you for all those that we are in the Forum and we didn't give answer to yours, I also saw them but the same as Martin I didn't feel qualified to give you an answer.
We should not give ourselves a bad opinion of the forum when we don't receive answer to a certain restlessness.
Let us continue supporting this type of tool so useful for us the modelistas of the world.
Cheers and all best.
From Venezuela South America.
Leal Antoniazzi Pedro.
[email protected]
We should not give ourselves a bad opinion of the forum when we don't receive answer to a certain restlessness.
Let us continue supporting this type of tool so useful for us the modelistas of the world.
Cheers and all best.
From Venezuela South America.
Leal Antoniazzi Pedro.
[email protected]
flitzer
England - North West, United Kingdom
Joined: November 13, 2003
KitMaker: 2,240 posts
AeroScale: 743 posts
Joined: November 13, 2003
KitMaker: 2,240 posts
AeroScale: 743 posts
Posted: Tuesday, March 16, 2004 - 02:50 AM UTC
Thank you too Pedro,
Pedro was my nickname at school....are we both members of the International Pedro Club?
Feeling better now... :-)
Cheers
Peter
Pedro was my nickname at school....are we both members of the International Pedro Club?
Feeling better now... :-)
Cheers
Peter
TreadHead
Colorado, United States
Joined: January 12, 2002
KitMaker: 5,000 posts
AeroScale: 370 posts
Joined: January 12, 2002
KitMaker: 5,000 posts
AeroScale: 370 posts
Posted: Tuesday, March 16, 2004 - 03:13 AM UTC
Howdy flitzer,
What's an Ar TEW 16?...... , just kidding. An attempt to make you stop sobbing, because you're making a scene, and all the ladies at the bar are beginning to move in your direction because they think you must be 'sensitive', and all the other guys at your cyber bar are beginning to get angry because you're bogarting all the ladies.....
#:-)
Tread.
What's an Ar TEW 16?...... , just kidding. An attempt to make you stop sobbing, because you're making a scene, and all the ladies at the bar are beginning to move in your direction because they think you must be 'sensitive', and all the other guys at your cyber bar are beginning to get angry because you're bogarting all the ladies.....
#:-)
Tread.
flitzer
England - North West, United Kingdom
Joined: November 13, 2003
KitMaker: 2,240 posts
AeroScale: 743 posts
Joined: November 13, 2003
KitMaker: 2,240 posts
AeroScale: 743 posts
Posted: Tuesday, March 16, 2004 - 03:49 AM UTC
Hi TreadHead
OH OH...my secrets out.... 3 wives later.....
Thanks and cheers.... mines a red head....
Peter
:-)
Quoted Text
and all the ladies at the bar are beginning to move in your direction because they think you must be 'sensitive'
OH OH...my secrets out.... 3 wives later.....
Thanks and cheers.... mines a red head....
Peter
:-)
antoniazzip
Aragua, Venezuela
Joined: November 13, 2002
KitMaker: 158 posts
AeroScale: 0 posts
Joined: November 13, 2002
KitMaker: 158 posts
AeroScale: 0 posts
Posted: Tuesday, March 16, 2004 - 06:47 AM UTC
Of course my friend when your you want... all best again for you and here in the forum you will be never alone I assure it to you me... happy modeler.
Leal Antoniazzi Pedro. :-)
[email protected]
Leal Antoniazzi Pedro. :-)
[email protected]