Hi all I bought this kit with money I got for my birthday, I've only ever built one balsa aircraft kit when I was still a lad in my teens (ahh how well I remember

the smell of dope and the lovely twist in the wing where I over zealously applied the dope to the tissue (think that's why it always seemed to crash land ) .

Well the kit arrived and it is an impressive kit.

The balsa and ply look to be good quality and the laser cutting is also very good.



There is a lot of balsa too.



I've no idea what the carbon rod is for (or a lot of the other stuff for that matter)

This is the instructions that come with the kit





That's it, no written instructions, nothing about how the fuselage goes together(there are hundreds of parts) since this is supposed to be an rc plane I'm assuming it's meant for experienced builders (of which I'm not) I dont intend to rc it I intend to build it with no skin on it and am going to stain the framework with red wood stain ( that's always assuming I can figure out how to assemble it)

Hi all well thanks to Ron I have some pdf instructions.

I thought I'd made my first error I was going to stain all the wood before gluing it all together as I thought the glue would stop the stain and wouldn't then look so good.

I started with the sides of the fuselage, as I was painting it on the balsa started to curve, i wasn't too worried as i thought when i do the other side as it dries it would straighten up again but it seemed as though it wouldn't so i started gluing some bits together hoping when i come to attaching the sides i could straighten them up then.

Luckily they leveled out by themselves, unluckily the glue does affect the stain. Not sure if it shows on the pics but anyway once the other side is on I dont think it will notice, so I've spent the rest of the afternoon staining all the rest of the parts for the fuselage.







It's going to be a fair size when done (at least as a static display model anyway)

Hi all more progress, once you've figured out how things go together the fit is great (even with the pdf files it's still confusing) I think the model has been updated since the pdf instructions as the numbers are different and a lot of the parts dont look like the pdf says they should, anyhow here's more progress pics.

Hi all more progress, some of the parts bare no resemblance to what the instructions say they should look like, it makes things very confusing.
Not sure what I'm going to do with the engine painting wise.

Hi all more progress on this, I'm really enjoying this, I'm considering adding the serves and control cables just to add more interest to the finished plane.

Very interesting model. I will keep an eye on this build.

Very cool!

Hi all more progress on this

Well got the upper wing structure done (shes going to be a fair size)

Got some work done on the middle wing

First 2 wings complete and a mockup of them on the plane (this thing will be huge)

Hi all, more progress it's a good kit as regards fit the instructions on the other hand.

Hi all well I'm calling this done, I intended to leave the woodwork showing and obviously never intend to fly it so i see no point in buying a prop for it.

Now it's done I have no idea what I'm going to do with it as it is huge so it will probably end its days in the shed hanging from the roof.

Really impressive work!

Thanks for sharing