WERNER'S WINGS [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
11
Black Hawk and Apache Skis
Werner's Wings H-60 and AH-64 Skis in 1/35 and 1/48
  • move

by: Gino P. Quintiliani [ HEAVYARTY ]

Introduction

The US Army has been operating in areas where the ground may be soft and inhospitable to landing helicopters on since they have been operating helicopters. To counter this problem, the Army developed a set of skis that can be attached to the helicopter’s landing wheels so they do not sink into the soft ground. For current helicopters, these skis are made by Landes Airglas and known as L20500 skis. The Airglas skis provide soft terrain (mud, sand, snow) support for military helicopters. These light, rugged, and economical wheel penetration skis allow operations from both hard surface and unprepared terrain. The skis provide solutions for soft terrain and can be configured to allow operation of hoists and ground handling equipment without removal of the ski.

Review

Werner’s Wings has released a great conversion kit to add skis to Academy’s 1/35 H-60 kits, Revell’s 1/32 AH-64, or any 1/48 H-60 or AH-64 kits. This set allows you to make any Black Hawk or Apache into a winter warrior.
The set comes in a zip-loc baggie containing 15 parts cast in white resin. The parts are further bagged to keep them from being damaged during shipping. Also included is a nicely done sheet of instructions with descriptions and clear pictures to assist in assembly.

The instructions are clearly written and have good illustrations for parts placement location. The assembly steps follow a logical sequence and also include pictures of actual helicopters mounting the skis as references.

Contents

The individual parts are sharply cast with a bit of flash on a few of the parts. The flash is not an issue though, as it can easily be trimmed. The parts look awesome. The finest detail of rivets on the skis and their mounts are exquisite. There are no real downfalls to the set. Also included is a very nice sheet of Jolly Green Giant decals for the bottom of the skis.

The assembly is pretty simple with attaching axles (not included) through the kit wheels. Next you attach the three-part struts that keep the skis in a level position when on the aircraft. Lastly, you attach the two-part rear wheel assembly to the back of the skis.
SUMMARY
Highs: Very nicely cast parts with great details.
Lows: None noted.
Verdict: I highly recommend this set. Overall the skis look very nice. Assembly is straight-forward and with no noted problem areas. The skis are a great addition to any Blackhawk or Apache kit. I see no major flaws in the kit, its dimensions, or details. Ano
  Scale: 1:1
  Mfg. ID: 35-13 and 48-12
  Suggested Retail: 1/35 $35 and 1/48 $30
  PUBLISHED: Jun 27, 2017
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.79%
  MAKER/PUBLISHER: 87.89%

About Gino P. Quintiliani (HeavyArty)
FROM: FLORIDA, UNITED STATES

Retired US Army Artillery Officer, currently a contractor at MacDill AFB in the Tampa, FL area. I have been modelling for the past 40+ years, really seriously on armor and large scale helos (1/32, 1/35) for the last 35 or so.

Copyright ©2021 text by Gino P. Quintiliani [ HEAVYARTY ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT