EDUARD [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

First Look Review
148
Focke Wulf Fw 190 A-6
  • ED_Fw190A6_Boxtop

by: Rowan Baylis [ MERLIN ]

Background
Production of the Fw 190 A-6 began in June 1943 and marked a turning point in the '190's development - this being the first version devised from the outset as a heavy-fighter. For some time it had been apparent that the MG FF cannon fitted in the outer-wing positions on earlier variants was becoming increasingly unsuitable for modern combat (in fact, they were often regarded as useless extra weight and removed at unit level), so now they were replaced by an additional pair of the much more potent MG 151 (the same as carried in the wing-roots). The fuselage-mounted MG 17s were retained, despite being largely ineffectual against armoured aircraft, for sighting the powerful battery of cannons.

The change in armament was accompanied by a strengthened wing structure and minor equipment changes but, otherwise, the 'A-6 was largely similar to its immediate predecessor - the A-5. Production was split between Arado, Fieseler and Ago and records indicate that 569 A-6s were produced.

The kit
Eduard's latest addition to it's range of 1/48 scale Fw 190s arrives in a sturdy conventional box. As we've come to expect from Eduard, the presentation is second-to-none - the sprues are bagged in groups with the clear parts packed separately, there's a set of pre-painted photo-etched parts, a sheet of painting masks, two sheets of decals and instructions printed in colour as a 16-page A-4 booklet.

The bulk of the kit is moulded in Eduard's distinctive olive green styrene on 8 x sprues containing 139 parts (plus a number of unused pieces destined for the spares box). A clear sprue contains separate sliding sections for the canopy to be displayed open or closed (the full-sized canopy was hinged at the top to allow it follow the shape fuselage as it was opened and closed). The moulding is excellent throughout, with finely scribed panel lines and faint embossed rivets on the surface of the airframe. Many people wince at the idea of rivets, but Eduard's depiction of them is probably the most subtle yet in thsi scale.

It's getting on for a year since the 'A-8 first appeared, so Eduard's Fw 190 is still, to all intents and purposes, new (in terms of the life-cycle of a mass-produced injected kit). So, as you'd hope, the moulding is very crisp and the only part where I've noticed a little flash is around the radiator fan.

As in my first look at the Fw 190 A-8 test-shot last year, the only slight sinkage is on the reverse of some of the thicker parts - moulding lugs for the engine etc. - and none will be visible when the parts are assembled.

As you'd expect when comparing the kit with the earlier releases, there are no great surprises, since many of the sprues are shared. However, at first glance, the kit appears to have been packed with an extra set of wings - in fact Eduard have provided 2 complete lower sections to allow the kit to be modelled with or without inner landing gear doors. (These were removed when a centre-line rack was fitted to the aircraft and the A-6 was the last of the A-series to carry them.)

Since the kit is similar to the earlier releases in the series, I won't describe it in detail here. Click on the following links for Jean-Luc Formery's full review of the Fw 190A-5.

Eduard's Fw 190A is widely regarded as the most detailed and accurate 1/48 scale kit of the aircraft, with a cockpit supplied with a choice of moulded or etched details, a well-detailed engine and fuselage guns area, wing-root cannon bays that can be displayed open and a main-wheel well featuring a rear spar, ribs and other details. This does, inevitably, all add up to a kit that is rather more complex to build than many comparable fighters in this scale. There are no major problems - but by the same token, this certainly isn't a model that will "build itself if you rattle the box" - and it's not a kit for beginners.

The assembly instructions do a good job making sense of this detailed kit. They are very clearly illustrated on 10 sides and are colour-coded to show areas to be glued or modified. Some of the sections are a little complex as they cover the alternative moulded/etched styles of building and multiple configurations for the colour schemes, but modellers with a little experience should have few problems.

Eduard have contacted me to warn that the first batch of kits (including the review sample) was shipped minus a supplementary sheet of instructions for applying the painting masks and stencil decals. For anyone who has one of these early kits. Eduard have provided a .pdf file of the missing pages which can be downloaded HERE. The oversight has been corrected for all subsequent releases of the kit.

Painting & Decals
Along with a very comprehensive set of stencils, the kit contains decals for 5 colour schemes:

A. "White 11", flown by Oblt Georg Schott, 1./JG 1, Deelen, The Netherlands, summer 1943.
B. "Black 7", flown by HansDortenmann, 2./JG 54, Eastern Front, February 1944.
C. "Black <<", flown by Anton Hackl, III./JG 11, Oldenburg, Germany, March 1944.
D. "Black <--", flown by Josef "Pips" Priller, JG 26, Lille-Vandeville, France, 1943.
E. "Black 13" - the same a/c as Scheme D., but with revised markings.

The decals in the review kit are beautifully printed - thin and glossy, with excellent register and crystal clear carrier film. The chequers for the cowling of Scheme A are divided into 6 items to be applied over a white base-coat. The breakdown looks practical, but there are some complex curves to negotiate, so be prepared to use decal softener to get everything settled and lined up...

Conclusion
Eduard's Fw 190 A-6 looks like another real beauty! With their combination of accuracy and detail, these kits have captured the imagination of modellers who initially doubted the wisdom of Eduard choosing the '190 as a subject. Revisiting the kit can't fail to get the building juices flowing again - look out for the on-line build to follow in the Forum - and only serves to whet the appetite for Eduard's next Luftwaffe kit, the Bf 110! Highly recommended.

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
SUMMARY
Highs: Eduard's '190's are superbly detailed and the most accurate in this scale. Photo-etched parts and painting masks included as standard. Comprehensive decal options.
Lows: As a result of the extra detail, assembly is a little more complex than some comparable kits.
Verdict: A superb kit - but not one for total beginners. But for modellers with a little experience, Eduard's is the '190 to go for.
Percentage Rating
95%
  Scale: 1:48
  Mfg. ID: 8171
  Suggested Retail: $ 39.95
  PUBLISHED: Jul 05, 2007
  NATIONALITY: Germany
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 88.37%
  MAKER/PUBLISHER: 88.59%

Our Thanks to Eduard!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View Vendor Homepage  |  More Reviews  

About Rowan Baylis (Merlin)
FROM: NO REGIONAL SELECTED, UNITED KINGDOM

I've been modelling for about 40 years, on and off. While I'm happy to build anything, my interests lie primarily in 1/48 scale aircraft. I mostly concentrate on WW2 subjects, although I'm also interested in WW1, Golden Age aviation and the early Jet Age - and have even been known to build the occas...

Copyright ©2021 text by Rowan Baylis [ MERLIN ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



Comments

That's one good-looking build so far. Some good pointers to remember when I start working on mine, I presume the earlier A8 kit is pretty much the same? I noticed you chose to cut down the cannon barrels to ease painting. I've built two Trimaster/dragon 190's and they have two-part cannon barrels and I've always thought of them as a pain in the rear. Getting them straight is a chore. With the second kit I replaced the barrels with metal tubing, and I had to drill holes for them, which turned out to be quite tricky. With this eduard kit, I'm planning to replace the entire barrels, drilling the mounting holes to the revievers and fit the barrels after painting. But, are the barrels slightly tapered?
JUL 19, 2007 - 10:40 PM
You guys are making me anxious to start on mine. Are we going to do a minibuild?
JUL 20, 2007 - 08:29 AM
Hi Eetu There's no sign of any taper in the shots of the MG 151/20 in the HT Model Special on the '190. All the best Rowan
JUL 20, 2007 - 08:47 AM
Ok, thanks. Then I'll be just skipping the aftermarket and using some metal tubing when I build mine.
JUL 20, 2007 - 09:30 AM
Hi again I couldn't resist taking a break from the main construction to see how the cowling checker decals would work out. First I painted the cowling gloss white (Revell 04) with some pre-shading along the panel and rivet lines. This will probably be a bit overdone by the time I've finished weathering for an aircraft that was probably kept pretty clean, but there you go - call it artistic licence... The black checker decals were a little fiddly to apply, but they fit well and are beautifully thin. They responded excellently to Microset - as you can see, they've snuggled down perfectly into the moulded details (and my grainy paint-job! - I would normally polish the paint before applying decals, but I was lazy this time... ). One small point to note: cowl decal #21 is mis-numbered as #6 in one of the painting instructions scrap views. All the best Rowan
JUL 21, 2007 - 05:52 AM
Looks like they worked well. They even got around those intake blisters and those can be a bear. I think the preshading works.
JUL 22, 2007 - 04:20 AM
Hi Rowan! Very nice chessboard cowling! I don't think the pre-shading is overdone... but you know how much I like "artistic license" The Eduard decals are fantastic! I remember those lozenge decals for the Fokker VII, the best I ever used! I'm looking forward to see more progress... Jean-Luc
JUL 22, 2007 - 06:12 AM
Rowan, this one really looks great! I cannot wait until my LHS get this one on stock. On the other hand it is not that urgent as I have my hands full with other projects right now.
JUL 24, 2007 - 06:59 PM
I am getting more and more tempted to try my skills on the Eduard Fokker VII. It could look great next to a FW 190. It would really show the development in fighter aircraft in 25 years. aquite interesting and compelling comparison...
JUL 24, 2007 - 07:02 PM
   
ADVERTISEMENT


Photos
Click image to enlarge
  • ED_Fw190A6_Parts_A
  • ED_Fw190A6_Parts_F
  • ED_Fw190A6_Parts_G
  • ED_Fw190A6_Parts_H
  • ED_Fw190A6_Parts_L
  • ED_Fw190A6_Parts_J
  • ED_Fw190A6_Parts_K
  • ED_Fw190A6_Clear_1
  • ED_Fw190A6_Clear_2
  • ED_Fw190A6_Etch
  • ED_Fw190A6_Colour_1
  • ED_Fw190A6_Colour_2
  • ED_Fw190A6_Colour_3
  • ED_Fw190A6_Decals_1
  • ED_Fw190A6_Decals_2
ADVERTISEMENT