WERNER'S WINGS [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

In-Box Review
135
Fuel Bladder sets
UH-1N / UH-1D/H Huey helicopter Fuel Bladder sets
  • move

by: Joe Szczygielski [ MOTHER ]

Introduction

Werner's Wings has released a really nice set of auxiliary fuel bladders in 1/35th. There are a total of 3 sets in all, Full Bladder, ¾ Full Bladder and ½ Full Bladder.
The Full Bladder and ¾ Bladder comes 1 each in a pack and is designed to fit on the left side of the cargo bay back wall. The ½ Full Bladder set comes in a two pack for both right and left sides.

Full Bladder #35-04.…$10.00
¾ Full Bladder #35-05.…$10.00
Half Full Bladders #35-06.…$15.00

Product Review

Each of the sets are intended for the Panda or Dragon kits of the UH-1N or the UH-1D/H. I wanted to see if they would work with the older 1/32 Revell Huey’s, so I dug out a kit and laid it against the wall and saw no real difference in the size so I think they will work well enough.
Each of the sets are ready to use right out the package. The pieces are moulded in light gray resin packed in a zip-lock bag. There is also a one sided page for the instruction sheet, included are two reference photos and the coloring guide for painting the bladders.
Casting is flawless in all the examples, well defined, clean sharp detail. The resin parts themselves only require a minimal amount of cutting and sanding to release them from the block.

The Huey’s range was extended significantly, the auxiliary fuel bladders extending search and rescue and missions beyond their normal capabilities. Though limiting seating space the bladders were easy to install using straps attached to the cargo wall. Up to 2 fuel bladders can be installed in cargo compartment.

You can purchase this set directly from
www.wernerswings.com and while there be sure to look for other fine products Werner Wings have to offer.


Review sample courtesy of Floyd Werner.
Werner’s Wings also has a great selection of resin parts to further update and detail the AH-1F Cobra. Be sure to check over at www.wernerwings.com for these resin parts and future releases.

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on Aeroscale.
SUMMARY
Highs: Great detail, easy to install.
Lows: Reference needed to add fuel line
Verdict: A great addition for detailing the interior of the Huey series of helicopters.
Percentage Rating
90%
  Scale: 1:35
  Mfg. ID: 35-04, 35-05, 35-06
  Suggested Retail: $10 and $15
  PUBLISHED: Aug 02, 2010
  NATIONALITY: United States
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 82.57%
  MAKER/PUBLISHER: 87.89%

Our Thanks to Werner's Wings!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item  |  View Vendor Homepage  |  More Reviews  

About Joe Szczygielski (mother)
FROM: NEW YORK, UNITED STATES

Copyright ©2021 text by Joe Szczygielski [ MOTHER ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved.



   
ADVERTISEMENT


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
ADVERTISEMENT