History

In 1959 the Swiss company Pilatus Aircraft built a single-engined light utility aircraft, the PC-6 Porter, with a Lycoming GSO-480 340 h.p. engine. The aircraft was built in relatively small quantities (72 units), but its construction, despite its basic nature, had great potential for a variety of tasks. Two years later there appeared the PC-6A Turbo Porter with a 520 h.p. Turbomeca Astazou engine which was better than its predecessor in all major performance indicators. Later, another engine was installed in the aircraft - the 550 hp Pratt & Whitney Canada PT6A. Now there were individual pilot doors on both sides of the fuselage in the PC-6B version, in addition to sliding side doors, which facilitated departure from the airport or evacuation of the cockpit in the air in case of emergency. As in the PC-6A, the nose displayed a characteristic straight and elongated shape. In the modified PC-6/B2-H2 a 680 horsepower engine was installed, which greatly improved the aircraft's capabilities.
The turbo-prop PC-6 quickly became popular among pilots, and the plane began to be exported outside Switzerland to many countries on different continents of the world. In 1963 several military arms in the United States were interested in it, and later in that same year a PC-6A was purchased for testing. Subsequently Fairchild Hiller Aircraft Corporation received a license to build the PC-6 in the U.S. A small number were completed as light strike aircraft (AU-23 Peacemaker); and the conventional PC-6B, which was used as a light transport for small quantities of people or cargo, was designated the UV-20A Chiricahua in the U.S. Army. Some of these machines have served not only in the U.S.but also abroad, as for example, with the American forces stationed in West Germany during the time of the Cold War. They were later returned to the U.S., where they are still used as vehicles for groups of parachutists.

In North and South America, the United States was not the only country which had the PC-6 in its inventory. Argentine Naval Aviation still flies the type today, patrolling the ocean coast. And the PC-6 is in service in Bolivia, Colombia, Ecuador and Mexico.

There were 19 PC-6 machines belonging to the Australian Air Force and they were extensively used, even during the Vietnam War, dropping Special Forces Groups directly into major combat zones. Also, the PC-6 was useful in evacuation of wounded men from the battlefield, transportation of partisan groups, covering withdrawal from the battlefield, and so on. In less than two years of service with Australian troops in Vietnam, PC-6 pilots carried out nearly seven thousand combat sorties, losing only one aircraft. After the withdrawal of U.S. forces from Vietnam, some Australian PC-6's were transferred to the "Air America" airline, while others were taken back to Australia, remaining as part of the country's Air Forces until 1993. After decommissioning almost all of them gained new private owners, and they are now frequent guests of various Air Shows.

Half a century after its first flight, the PC-6 is still in military and civil service in many parts of the world, joining the same rare club as such famous aircraft as the Piper Cub or the Antonov AN-2, proving that sometimes a machine which at first sight seems basic and simple in design, can outlast many of its more sophisticated and advanced brethren. info from Roden Website.

the Kit Contents

9 sprues with a total of 176 parts.
5 scheme decals
12 page instruction booklet.

Build Notes

It is a typically solid Roden boxing with 176 plastic pieces and a sheet of decals for the Air America versions. The 12 page instructions have the usual information, parts map exploded view format layouts. A template is provided for the specific locations for the identity lights, communications arrays and cabin air intake and exhaust ports. These are not molded into the cabin turtledeck for two reasons.

1. When uniting the fuselage halves you won't have to worry about erasing the details when blending the seam. This method allows for several kit versions with only a few sprue differences.

2. Roden has already punched out a USAF Peacemaker version,( Kit # 439 released in March 2010). Then there was the Air America version.,( Kit # 440 released in June 2010).
The fuselage and wing components were test fitted and go together nicely. There is also an correction that Roden posted on their web site. http://www.roden.eu/HTML/framemodels.htm - dated 30 June 2010.

Decals

1. Fairchild UV-20A Chiricahua, s/n 79-23253, USA Army Group on West Europe, Tempelhorf, West Germany, May 1980.
2. Fairchild UV-20A Chiricahua, s/n 79-23254, Golden Knights Parachute Team, Pennsylvania, October 2009.
3. Pilatus PC-6/B1-H2 Turbo Porter G-2/0686, Argentinian Armada (Air Force), mid-late 1980th.
4. Pilatus PC-6/B1-H2 Turbo Porter A14-690, No.161 (Independent) Recce Flight, Australian, later 1st Aviation Regiment, Army Air Force, Vietnam, 1969.
5. Pilatus PC-6/B1-H2 Turbo Porter A14-684, No.173 (General Support) Sqn Royal Australian Air Force, New South Wales, October 1988.

When contacting manufacturers and publishers please mention you saw this review at AEROSCALE

Since this review the kit was sent to member Red04 and was finished in good order. See theadditional images link below.