1⁄35
The Future Is Klear

by Mal Mayfield
5
Comments

The Klear dries very quickly and is actually dry enough for a second coat in minutes, if not seconds. The second coat on the Spitfire was actually done after 5 minutes. You can of course leave it as long as you like, I have read of modellers air brushing Klear and leaving it a week to dry?  You may get a sort of patchy affect and the surface may not be as shiny as you would expect neither of these things is a problem. The patchyness will disappear under the matt coat and as long as the surface is smooth decals will play the game, (believe me I never have a really glossy surface for decals).

About the Author

About Mal Mayfield (Holdfast)
FROM: ENGLAND - SOUTH WEST, UNITED KINGDOM

Hi, my name is Mal Mayfield and I have been modelling seriously for about 25 years. My main interest is 1/48 scale second world war. I build all types and all combatants. I have built 1/35 scale "targets" and 1/72 scale modern aircraft, plus a couple of cars. I have also dabbled with figure painting...


Comments

Merlin
Nice one Mal That's an excellent How-To Feature :-) Really nicely written and laid out to explain the techniques clearly. :-) All the best Rowan
SEP 07, 2003 - 06:22 PM
JPTRR
Hi Mal, Well done. I have used Future/Klear for a few years now. Airbrushing can be tricky. Frequently I get 'orange peel', the patchy surface you may be writing of. I have found that multiple VERY LIGHT coats attenuate this. TO REMOVE this product, use ammonia, which almost instantaneously disolves it. I have removed Future with ammonia from Pactra Acryic, Polly Scale and AeroMaster without any effect on the unsealed paint. And you gotta luv that smell! All the best, Fred
SEP 20, 2003 - 06:04 AM
tek2
Yes, a most excellent article Mal. Easily understood.
SEP 22, 2003 - 10:11 AM
thenamshow
yea great tip for biggebers or poeple that just didnt know that
NOV 01, 2003 - 03:41 AM
firemann816
Thanks HoldFast - I was going to AB Future onto my models before i did thier wash to help the wash run into the recesses. I'll brush it by hand now, b/c I sure dont want pooling and I really dont want to lose any surface detail either. Thanks for the fine feature.
NOV 07, 2003 - 12:13 PM
Go to Forum Topic

Copyright ©2021 by Mal Mayfield. Images also by copyright holder unless otherwise noted. The views and opinions expressed herein are solely the views and opinions of the authors and/or contributors to this Web site and do not necessarily represent the views and/or opinions of AeroScale, KitMaker Network, or Silver Star Enterrpises. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved. Originally published on: 2003-09-08 00:00:00. Unique Reads: 23868