_GOTOBOTTOM
Early Aviation
Discuss World War I and the early years of aviation thru 1934.
WNW GB 2009- 10 Albatros D.V. Mr.Mox
gajouette
_VISITCOMMUNITY
Texas, United States
Joined: February 01, 2007
KitMaker: 365 posts
AeroScale: 356 posts
Posted: Sunday, May 02, 2010 - 03:50 AM UTC
Jan,
Great work my friend.The weathering on the fuselage is very subtle and affective.
Regards,
Gregory Jouette
MrMox
_VISITCOMMUNITY
Aarhus, Denmark
Joined: July 18, 2003
KitMaker: 3,377 posts
AeroScale: 115 posts
Posted: Sunday, May 02, 2010 - 09:07 PM UTC
Thanks, I am quite happy with the result so far.

Last chance to see - last shot before adding the upper wing. The instructions are a bit unclear on this point, but apparently the green shield was not fitted to the Udet craft but instead it had a kind of scope - so the plate aint present any longer.

Sadly not much will be visible when the wing goes on.



Prepared the wing for rigging, easier to fit the wires before putting the wing on - what a mess:



Closeup of the simulated turnbuckles - could be more detailed but lazyness got the better of me.



And the port side with full rigging:



Cheers/Jan
thegirl
_VISITCOMMUNITY
Alberta, Canada
Joined: January 19, 2008
KitMaker: 6,743 posts
AeroScale: 6,151 posts
Posted: Monday, May 03, 2010 - 02:23 AM UTC
What a nice treat to have another WNW D.V almost done ! She looks very nice Jan and nothing wrong with the rigging either . Looking foward to the finishing touches
Mgunns
_VISITCOMMUNITY
Arizona, United States
Joined: December 12, 2008
KitMaker: 1,423 posts
AeroScale: 1,319 posts
Posted: Monday, May 03, 2010 - 02:39 AM UTC
Looking Good Jan:

Your use of shading and shades of grey really make for an eye catching scheme and add interest to what would normally be thought of as a boring scheme. I like it.

Best
Mark
Saisei
_VISITCOMMUNITY
Aarhus, Denmark
Joined: May 15, 2006
KitMaker: 6 posts
AeroScale: 2 posts
Posted: Monday, May 03, 2010 - 06:22 AM UTC
Looking good...
Merlin
Staff MemberSenior Editor
AEROSCALE
#017
_VISITCOMMUNITY
United Kingdom
Joined: June 11, 2003
KitMaker: 17,582 posts
AeroScale: 12,795 posts
Posted: Monday, May 03, 2010 - 08:49 AM UTC
Hi Jan

Lovely work! The extra plumbing on the fuel tank looks great, as does the rigging! It looks like we're going to have an other Albatros that should go on the Frontpage - perhaps we can do a Wingnut's Special one weekend!

All the best

Rowan
Kornbeef
_VISITCOMMUNITY
England - South East, United Kingdom
Joined: November 06, 2005
KitMaker: 1,667 posts
AeroScale: 1,551 posts
Posted: Monday, May 03, 2010 - 10:02 AM UTC
well she is looking just beautiful Jan.

Keith
MrMox
_VISITCOMMUNITY
Aarhus, Denmark
Joined: July 18, 2003
KitMaker: 3,377 posts
AeroScale: 115 posts
Posted: Monday, May 03, 2010 - 07:29 PM UTC
Thanks - I“m quite happy with the result so far, even if theres a bunch of things I could/should have done differently - well its a learning curve


Quoted Text

It looks like we're going to have an other Albatros that should go on the Frontpage - perhaps we can do a Wingnut's Special one weekend!



Thats not entirely impossible, but lets wait until its done, and I have done a decent batch of pictures - in fact you can just lift the pictures from my gallery when we get there - I do hope we are going to see one big feature with all the contributions when the builds over ?

Cheers/Jan

MrMox
_VISITCOMMUNITY
Aarhus, Denmark
Joined: July 18, 2003
KitMaker: 3,377 posts
AeroScale: 115 posts
Posted: Tuesday, May 04, 2010 - 09:57 AM UTC
Allmost there, did some oil-spill here and there on the engine area and some chipping on the metal parts - painted the turnbuckles on the rigging steel as I don“t think brass is the right color - so whats still to do ?

Need to wash and dirty up the undercarriage
soot from the exhaust and some dripping on the wing
the rear carriage need some washes and a clear finish on the wooden part
And maybe a little more dirt and grime around the engine and on the windscreen

Heres some pics of the current state:










Cheers/Jan
thegirl
_VISITCOMMUNITY
Alberta, Canada
Joined: January 19, 2008
KitMaker: 6,743 posts
AeroScale: 6,151 posts
Posted: Tuesday, May 04, 2010 - 01:10 PM UTC
Looking very , very nice Jan . So far the weathering is super on cowl with the paint chipping . Looking forward to see the final results .

How did you do the chipping ?
md72
#439
_VISITCOMMUNITY
Washington, United States
Joined: November 05, 2005
KitMaker: 4,950 posts
AeroScale: 3,192 posts
Posted: Tuesday, May 04, 2010 - 01:31 PM UTC
Oh Wow, you can almost hear the cylinders poping as they cool!
BradCancian
_VISITCOMMUNITY
Queensland, Australia
Joined: August 30, 2006
KitMaker: 285 posts
AeroScale: 281 posts
Posted: Tuesday, May 04, 2010 - 06:13 PM UTC
This one is looking very nice! I too like the subtle shading and the paint chipping. Would be interested in how you did the chipping as this is something that I am not too good at.



BC
MrMox
_VISITCOMMUNITY
Aarhus, Denmark
Joined: July 18, 2003
KitMaker: 3,377 posts
AeroScale: 115 posts
Posted: Tuesday, May 04, 2010 - 06:32 PM UTC
Thanks alot - I did the chipping using one of those hard plastic spoonges used in cleaning and dishwashing.

Cut a little piece aprox 1x1 cm. Mine included a hard and a soft side. I used the hard side as its easier to control.

Dip gently in a appropiate color and dapple most of on e piece of paper. Then apply to the areas where the risk of chippings occur - edges, assemblys, where bolts and screws are and at hatches.

Take care to alternate the direction of the spoonge so you dont get a to repeated pattern.

Start out gently - judge the results - and go over the area again until you are happy with the result.

Theres a tucturial on the WNW site for applying mottled camouflage where they use the spoonge technique - but with chipping you have to be carefull not to get a repeated pattern, whereas replicating a spoongeapplied camouflage you will see the original being a pattern from the guy applying the stuff.

Cheers/Jan
badwolf
_VISITCOMMUNITY
England - East Anglia, United Kingdom
Joined: November 16, 2009
KitMaker: 79 posts
AeroScale: 75 posts
Posted: Tuesday, May 04, 2010 - 07:39 PM UTC
One nice looking aircraft.
MrMox
_VISITCOMMUNITY
Aarhus, Denmark
Joined: July 18, 2003
KitMaker: 3,377 posts
AeroScale: 115 posts
Posted: Thursday, May 06, 2010 - 05:29 AM UTC
Thanks Keith - well, I think I will call it done, it was/is a truly enjoyable build - more or less out of the box - and for sure not the last time I am going to do a WNW kit.

Cheers/Jan

















Kornbeef
_VISITCOMMUNITY
England - South East, United Kingdom
Joined: November 06, 2005
KitMaker: 1,667 posts
AeroScale: 1,551 posts
Posted: Thursday, May 06, 2010 - 07:44 AM UTC
Beeeeeeeeeeeautiful

JackFlash
_VISITCOMMUNITY
Colorado, United States
Joined: January 25, 2004
KitMaker: 11,669 posts
AeroScale: 11,011 posts
Posted: Thursday, May 06, 2010 - 05:59 PM UTC
I have to say that she is a honey! Great job on the simulated silbergraü. Udet would have been proud.
Pulpinator
_VISITCOMMUNITY
Stockholm, Sweden
Joined: March 25, 2007
KitMaker: 78 posts
AeroScale: 53 posts
Posted: Thursday, May 06, 2010 - 08:45 PM UTC
Super sweet build!
I love the choise of painting scheme, very elegant and clean. weathering is also top notch, proof that armour painting techniques carry over to aviation very well!
RAGIII
_VISITCOMMUNITY
North Carolina, United States
Joined: June 19, 2007
KitMaker: 604 posts
AeroScale: 600 posts
Posted: Friday, May 07, 2010 - 03:28 AM UTC
Great looking bird! Very well done indeed!!
RAGIII
MrMox
_VISITCOMMUNITY
Aarhus, Denmark
Joined: July 18, 2003
KitMaker: 3,377 posts
AeroScale: 115 posts
Posted: Friday, May 07, 2010 - 08:13 PM UTC
Thanks guys, Im happy with the result myself even if some of the steps in the construction and painting was quite intimidating from the beginning - especially the rigging gave me some headache along the way - until I got the inspiration from another build - I“m sorry to say that I cant remember which, but thanks !

I have some other projects on schedule, but I think I will return at some point with either a "Hisso" or a Pup.

Regarding pictures, Im not happy with the last batch, so I will to take another set some other day.

Cheers/Jan
 _GOTOTOP