I was ill for some time so i haven't had any time to do models.
Now everything is finally fine and i decided to do some modelling.I chose this model because it seems like a nice OOB build and i always wanted to try alclad.
After this I will finish the S-2F tracker which i was commissioned with but was unable to build it.
So,here we go.
This is the kit i will be doing
I started out with the cockpit and the wheelbays.
The cockpit is quite simple with only couple of parts.
Trumpeter suggest RLM02 as the cockpit and wheelbay color,but knowing trumpeter isn't most reliable on paints I searched the internet for some pictures and decided to use a little lighter shade of gray
Wheelbay
Cockpit
IMO not even close to RLM02.
The wheelbays are nicely detailed (Some pin marks but easy to cover with styrene).
Here are some pictures of the primed cockpit and the wheelbays
The model is quite big for it's scale,there were some flash on the fuselages but there shouldn't be any major fit issues
Here are the seats and control columns,Ill try to add some detail to them.
That's all for today,expect some updates in a day or two.
Kind regards,Sven.
