1⁄72
Wednesday, April 12, 2017 - 11:54 PM UTC
Special Hobby are all set to release a mixed-media 1:72 kit of the Lloyd C. V. Containing styrene and resin parts, the kit will include markings for a trio of Austro-Hungarian colour schemes.
”Category C aircraft, i.e. two-seater, armed, reconnaissance aircraft were frequently used by both the German and the Austro-Hungarian air forces. The Lloyd C.V. recce aircraft were used by the Austria-Hungaria also for gunfire control. The design of the new Lloyd was remarkable; especially the wings, which were covered with a 1.2 mm thick veneer and had excellent aerodynamic characteristics. The first Lloyd C.V. series 46 aircraft started to serve with operational squadrons on the Eastern front in Galicia in September 1917. The type´s initial deployment was not trouble free and the pilots would complain mainly about the non-standard controls, these being replaced by standard ones (steering-wheel control, etc.) by November 1917. Subsequently, Lloyds proved to be sturdily designed planes with good manoeuvrability. As the production was not able to meet the demand and the Daimler power units were also in short supply, it was decided to commence a licence production of Benz engine-equipped Lloyd C.V series 82 in WKF company. At the height of their operational use as many as 12 units (Flik) of the Austro-Hungarian Air Force were equipped with Lloyds. Some planes had a small coffin-shaped box encompassing the machine gun on their upper wing while others only had a cylindrical tank there. Eventually, when the planes were found unsuitable for the front line because of their insufficient power they continued to be used in pilot training.
The kit´s three styrene sprues have been accompanied by 3D-designed resin parts and a set of photo-etched details. The scheme options offer three Austro-Hungarian Air Force machines, one of them in two various styles.”
Kit #SH72122 - Lloyd C. V series 82 is due for release soon.
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
The kit´s three styrene sprues have been accompanied by 3D-designed resin parts and a set of photo-etched details. The scheme options offer three Austro-Hungarian Air Force machines, one of them in two various styles.”
Kit #SH72122 - Lloyd C. V series 82 is due for release soon.
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
Click Star to Rate
2 readers have rated this story.
THIS STORY HAS BEEN READ 1,780 TIMES.
Special Hobby Reviews | MORE |
Sunderland Mk.III by Tim Hatton | of 1 ratings, 100% found this helpful | |
AH-1G Cobra by Andy Brazier | of 1 ratings, 100% found this helpful | |
Reggiane Re.2005 Sagittario by Rowan Baylis | |
Hawker Tempest Mk.VI by Tim Hatton | of 1 ratings, 100% found this helpful | |
Mirage F.1EQ/ED by Tim Hatton | |
DH 100 Vampire Mk.I by Tim Hatton | |
FH-1 Phantom by Andy Brazier | of 1 ratings, 100% found this helpful | |
Saab SK-37E Viggen by Rowan Baylis | |
Dornier Do 27/CASA C-127 by Tim Hatton | |
Barracuda Mk.II by Andy Brazier | |
Blackburn Skua Mk. II by Rowan Baylis | of 2 ratings, 100% found this helpful | |
Fokker D.II by Rowan Baylis | of 1 ratings, 100% found this helpful | |
SB2C-5 Helldiver by Andy Brazier | |
Yak-3 by Rowan Baylis | of 2 ratings, 100% found this helpful | |
CA-19 Wirraway by Is a secret |
Comments