1⁄72
Saturday, December 30, 2017 - 12:18 AM UTC
ARMA Hobby has announced it is working on a new tool PZL P.11c in 1/72 scale
”The first model planned for 2018 is the PZL P.11c model in the 1/72 scale. The model will be released at the beginning in two boxes: Expert Set and Junior Set. Developing the set was quite a challenge. The project gained a lot thanks to the experience gained during the development of the PZL P.7a and Fokker E.V. We tried not only to be faithful to the original but also easy to assemble. We took care of the mapping of corrugated iron and many, so far treated with neglect in detail models, such as the interior truss with installation details, machine guns, antenna masts and lifting hooks. We are especially pleased with the projection of the bottom of the front part of the fuselage, with the fuel tank, hooks on the chassis tendons and blinds. The model is in the process of starting the production of moulds. Below are 3D renderings of the model, plastic parts and sprue”
ARMA Hobby
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here – on AEROSCALE
ARMA Hobby
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here – on AEROSCALE
Click Star to Rate
Only 1 reader has rated this.
THIS STORY HAS BEEN READ 2,631 TIMES.
Arma Hobby Reviews | MORE |
Hurricane Mk.I by Kevin Brant | |
TS-11 Iskra Bis DF by Kevin Brant | of 1 ratings, 100% found this helpful | |
PZL P.11c by | of 2 ratings, 100% found this helpful |
Comments