Bf 109 G Lower Engine

¹⁄32

Wednesday, November 14, 2018 - 10:49 AM UTC

AIMS is producing a number of printed copies of the lower part of the engine and cowl for the Revell 1/32 scale Bf 109 G

”AIMS 32P004 1/32 Bf 109 G lower engine plug and cowl for Revell kits
The set will be £12.50. I sent off to the printers yesterday the small PE frame that includes 2x latches needed plus the control arm for the oil cooler flap but it you already have the latches like on my 'hatches and latches' set and can make the simple control arm yourself then the set is available now - email me at [email protected] as per normal. 90% of the pipe work is part of the engine plug so just add the pipe work for the oil cooler and hydraulic oil cooler flap arm - the pipework that comes out of the heat shields below the exhausts on both sides and add /extend pipe work at the back of the engine. Add a small shelf to the lip of the amended Glycol cowl and you are done. I recommend the set be used in conjunction with the Barracuda oil cooler housing.
Thanks for your interest, J”

32P004 - Bf 109 G lower engine plug and cowl – 1/32

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.

Click Star to Rate