Lugraph has presented details of the makeup of their with the 1/32 and 1/48 scale release of the Hawker Nimrod Mk.I

Hawker Nimrod Mk.I. Lukgraph 1:32 and 1:48 scale.
"Fuselages are printed (both scales) – on the picture directly from the printer + primer. Parts requires minor smoothing adjustments. This time the cast elements in kitset will be only: fuselage, wings (upper and lower) and rear fins (vertical and horizontal). Everything else will be directly 3D printed: all struts, wheels, exhaust pipes, headrest, air intake, radiator, rear support (with additional brass wire). 3D printing is also the whole interior and here it is a novelty - the grate is already assembled as a whole (as one piece part). Additionally, the seat, the instrument panel, the control column and all the elements inside.
The rest will be complemented by photo-etched parts to enhance the interior.
The model will be given without resin casting blocks - they will be removed and the model will be pre-cleaned. Supports for 3D prints - the minimum quantity to guarantee a good print.
Windscreen as photo-etched frame + laser cut foil 0.5 mm, secured with double-sided foil ensuring perfect transparency.
Painting schemes: 2 or 3 in both scales.
Due to the advanced release technology, the model should be easy to assemble even for people who have not dealt with resin kits."
Lukgraph Team

Hawker Nimrod Mk.I – 1/48 and 1/32

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here – on AEROSCALE.