¹⁄32

Łukasz Sznajder of Lukgraph has provided some details of some of the smaller parts being created for the 1/32 scale Hawker Nimrod Mk.1

”Update to the Hawker Nimrod 1:32 set.
The photos show all the 3D printed parts that will be included.

There are several innovations:
●Grate-interior in one piece (it will save a lot of time searching for geometry and cleaning)
●Main cooler also in 1 piece
●The exhaust pipe collector was originally supposed to be made of photo-etched sheets but in the end I made it 3D - it turned out very well.
●Control panel integrated with the compass

When designing, I used the minimum number of supports to guarantee a printout, so you can cut all parts efficiently and without any problems.
Overall, there are almost 50 parts of direct components from 3D printing.
All the printed parts will be described in detail in the model manual.”
Łukasz Sznajder

32-38 - Hawker Nimrod Mk.1 – 1/32

Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here – on AEROSCALE.