1⁄35MH-60S Knight Hawk
15
Comments
History
In the late 1990s, the US Navy decided to replace its venerable CH-46 Sea Knight helicopters. After sea demonstrations by a converted UH-60, the Navy awarded a production contract for the CH-60S. The variant first flew on 27 January 2000 and it began flight testing later that year. The CH-60S was redesignated MH-60S in February 2001 to reflect its planned multi-mission use. The MH-60S is based on the US Army’s UH-60L and has many naval SH-60 features. Unlike all other Navy H-60s, the MH-60S is not based on the original S-70B/SH-60B platform with its forward-mounted twin tail-gear and single starboard sliding cabin door. Instead, the S-model is a hybrid, featuring the main fuselage of the S-70A/UH-60, with large sliding doors on both sides of the cabin and a single aft-mounted tail wheel; and the engines, drivetrain and rotors of the S-70B/SH-60.The MH-60S is deployed aboard aircraft carriers, amphibious assault ships, Maritime Sealift Command ships, and fast combat support ships. Its missions include vertical replenishment, medical evacuation, CSAR (Combat Search And Rescue), ASW (Anti-Surface Warfare), maritime interdiction, CAS (Close Air Support), ISR (intelligence, surveillance and reconnaissance), and special warfare support. The primary means of defense is with the M60D or M240D/H machine guns. An Armed Helo Kit based on the Army's MH-60L DAP was developed to accommodate Hellfire missiles, Hydra 70 2.75 inch rockets, or larger guns. GAU-21 .50 cal machine guns can also be carried in the rear cargo door openings. The MH-60S can also be equipped with a nose mounted Forward-Looking InfraRed (FLIR) turret; it also carries the ALQ-144 Infrared Jammer.
The MH-60S is unofficially known as the "Knight Hawk", referring to the preceding Sea Knight, though "Sea Hawk" is its official DoD name.
Comments
Great job and review Gino! I have this kit at home and have been adding a few more 1/35 scale helos. Looks like I will be giving Chris at CC another order soon!
NOV 11, 2015 - 11:27 PM
Thanks Jeff. I really enjoyed this one. Chris' products are great. You will really like them.
NOV 12, 2015 - 01:35 AM
Now that's a build story!!!
I hope that one day, I will reach this level (although doubting)
NOV 24, 2015 - 02:01 AM
Thanks Drabslab. I'm sure you could do a great job on one as well.
NOV 24, 2015 - 06:40 AM
I was reading this last week and then lo and behold, someone had it at a show Saturday for $35! Obviously had to grab it. With what I saved I guess I'll be picking up a few detail sets.
DEC 06, 2015 - 05:55 PM
Good luck on it. It can become a great model. I highly recommend the Shapeways printed rotor hinges, by our own Matt Leese. The folded rotors (and tail) really save on the space it can take up.
DEC 06, 2015 - 08:35 PM
Copyright ©2021 by Gino P. Quintiliani. Images also by copyright holder unless otherwise noted. The views and opinions expressed herein are solely the views and opinions of the authors and/or contributors to this Web site and do not necessarily represent the views and/or opinions of AeroScale, KitMaker Network, or Silver Star Enterrpises. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of AeroScale. All rights reserved. Originally published on: 2015-11-11 01:20:51. Unique Reads: 16360