1⁄72
Wednesday, December 05, 2012 - 10:45 AM UTC
Ozmods have released a jig to assist you with assembling their C-130J Props.
Queensland company, Ozmods, recently released a C-130J Propeller and Nacelle correction set for use with the Italeri C-130J kit. This set has the blades seperate to the hubs and attaching six blades to each hub may be a little patience testing at best. To assist the eager C-130J modeller in performing this task Ozmod has released a jig to line up the blades in the feathered position. Whenever the C-130J engines are not turning and burning the props are in the feathered position. So they are in the feathered position for 90% of the time.
Keep an eye out for a review of the jig and the Correction Set.
This jig is available directly from Ozmods website.
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
Keep an eye out for a review of the jig and the Correction Set.
This jig is available directly from Ozmods website.
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
Click Star to Rate
No one has rated this yet.
THIS STORY HAS BEEN READ 2,844 TIMES.
OzMods Reviews | MORE |
Pilatus PC-9 by Is a secret | |
1/72 C-130J Correction Kit by Warren Inman | |
C-130J Blade Allignment Jig by Warren Inman |