Rob,
nice going with the removal of those lights. All that detail next to them is still perfect.
Joel
Air Campaigns
Want to start or join a group build? This is where to start.
Want to start or join a group build? This is where to start.
Hosted by Frederick Boucher, Michael Satin
OFFICIAL: National Pride Campaign
Joel_W
Associate Editor
New York, United States
Joined: December 04, 2010
KitMaker: 11,666 posts
AeroScale: 7,410 posts
Joined: December 04, 2010
KitMaker: 11,666 posts
AeroScale: 7,410 posts
Posted: Monday, March 16, 2015 - 06:22 AM UTC
Posted: Monday, March 16, 2015 - 12:07 PM UTC
Thanks Joel!
I have painted and installed the splitters and attached the wings also cleaned up one of the air brakes.
Cheers Rob.
I have painted and installed the splitters and attached the wings also cleaned up one of the air brakes.
Cheers Rob.
Posted: Monday, March 16, 2015 - 10:15 PM UTC
Looks good, Rob. It is beginning to look like a Voodoo.
Nice to see you keep an uncluttered work space
Nice to see you keep an uncluttered work space
Posted: Wednesday, March 18, 2015 - 02:57 AM UTC
Rob, great to see a Voodoo being built. One of my favourites.
Made some more progress on my Tiger Moth. It's now starting to look like an aeroplane. The wings fit beautifully and have very nicely done rib detail. The trailing edges of the wing and tailplane are VERY thin and needed some gentle sanding to get rid of the mold line. Having worked on a pig of a kit for the Seaplane campaign, it's great to have something which builds so well. I'm now looking forward more than ever to building a couple of other Airfix new releases if this is anything to go by.
Stephen
Made some more progress on my Tiger Moth. It's now starting to look like an aeroplane. The wings fit beautifully and have very nicely done rib detail. The trailing edges of the wing and tailplane are VERY thin and needed some gentle sanding to get rid of the mold line. Having worked on a pig of a kit for the Seaplane campaign, it's great to have something which builds so well. I'm now looking forward more than ever to building a couple of other Airfix new releases if this is anything to go by.
Stephen
Posted: Wednesday, March 25, 2015 - 02:15 AM UTC
Posted: Sunday, March 29, 2015 - 11:18 AM UTC
Started on the airbrakes, these are the parts I will solder them together for strength. I also had to redo the top seam as it came apart adding the wing and I didn't do such a good job when I re-glued it.
Cheers Rob.
Cheers Rob.
Posted: Monday, March 30, 2015 - 09:16 PM UTC
A little more progress on the Danish anniversary F-16.
I could not resist the temptation and had to add a full load of missiles, fuel tanks, and bombs.
I understand the unlikely scenario that an anniversary F-16 would load up with live ordnance, live missiles, and dummy missiles at the same time. However, I used some artistic licence and it just looks good
Next are the decals. I have already started - more to follow soon.
I could not resist the temptation and had to add a full load of missiles, fuel tanks, and bombs.
I understand the unlikely scenario that an anniversary F-16 would load up with live ordnance, live missiles, and dummy missiles at the same time. However, I used some artistic licence and it just looks good
Next are the decals. I have already started - more to follow soon.
Joel_W
Associate Editor
New York, United States
Joined: December 04, 2010
KitMaker: 11,666 posts
AeroScale: 7,410 posts
Joined: December 04, 2010
KitMaker: 11,666 posts
AeroScale: 7,410 posts
Posted: Tuesday, March 31, 2015 - 03:38 AM UTC
Jesper,
Your paint scheme looks dead on perfect. Can't wait see it with the decals. It should be really quite spectacular.
Joel
Your paint scheme looks dead on perfect. Can't wait see it with the decals. It should be really quite spectacular.
Joel
Torpon
Spain / España
Joined: February 28, 2012
KitMaker: 103 posts
AeroScale: 102 posts
Joined: February 28, 2012
KitMaker: 103 posts
AeroScale: 102 posts
Posted: Tuesday, March 31, 2015 - 11:43 PM UTC
Posted: Friday, April 03, 2015 - 09:26 PM UTC
Here is my build ready for masking and primer:-
Posted: Saturday, April 04, 2015 - 12:41 PM UTC
Thanks a lot for the comment, Joel. Appreciate it.
Carlos, great choice! I have this kit in my stash. Some fantastic camouflage and marking schemes included. What is your choice?
Richard, looking forward to see it with some color on it
I have finished my MA 727 Anniversary Danish F-16. A nice little build and one of my best 1/72 results so far. For sure the coolest decals ever - if you are a Dane at least
The final varnish coat did not go on perfectly. Might have been too much moisture in the air. Smaller point and not really noticeable unless really getting close, but still annoying
Carlos, great choice! I have this kit in my stash. Some fantastic camouflage and marking schemes included. What is your choice?
Richard, looking forward to see it with some color on it
I have finished my MA 727 Anniversary Danish F-16. A nice little build and one of my best 1/72 results so far. For sure the coolest decals ever - if you are a Dane at least
The final varnish coat did not go on perfectly. Might have been too much moisture in the air. Smaller point and not really noticeable unless really getting close, but still annoying
Posted: Saturday, April 04, 2015 - 10:18 PM UTC
Jesper that is a lovely model. the tail decal is gorgeous!
Too bad the varnish went wrong. I have experienced that, but I never understand what variable was the cause.
Too bad the varnish went wrong. I have experienced that, but I never understand what variable was the cause.
air-aset
Ecuador
Joined: March 25, 2004
KitMaker: 84 posts
AeroScale: 42 posts
Joined: March 25, 2004
KitMaker: 84 posts
AeroScale: 42 posts
Posted: Sunday, April 05, 2015 - 09:57 PM UTC
@Joel, Amazing Eagle!!
@Lee, Very nice double build.
@Ben, Thanks for the encouragement. Here are some progress shots.
@Lee, Very nice double build.
@Ben, Thanks for the encouragement. Here are some progress shots.
Torpon
Spain / España
Joined: February 28, 2012
KitMaker: 103 posts
AeroScale: 102 posts
Joined: February 28, 2012
KitMaker: 103 posts
AeroScale: 102 posts
Posted: Monday, April 06, 2015 - 11:38 PM UTC
Jesper, what a gorgeous model! I am going to do a double build eventually: one republican and one captured fascist.But I may finish only the republican one for this campaign.
Gonzalo, I have that model in my stash, looking forward to your build.
Gonzalo, I have that model in my stash, looking forward to your build.
Posted: Saturday, April 11, 2015 - 02:19 PM UTC
I have been working on the cockpit, I like how some of it is coming. I am finding the detail is a little soft, one thing that came out well although it's hard to make out in my bad picture is the radar screen I got the square screen with red cover really well.
Cheers Rob.
Cheers Rob.
Posted: Sunday, April 12, 2015 - 04:33 PM UTC
I am haveing problems with my build. I can't seem to get my decals to print the correct size. Tha and other things are forcing me to drop out of this campaign. I don't think I can make the deadline.
Posted: Sunday, April 12, 2015 - 05:35 PM UTC
Thanks for the comments, Carlos and Jonanthan. Much appreciated.
Darrel, sorry to hear. There will always be a hangar queen campaign at some point to enter your build.
Darrel, sorry to hear. There will always be a hangar queen campaign at some point to enter your build.
Joel_W
Associate Editor
New York, United States
Joined: December 04, 2010
KitMaker: 11,666 posts
AeroScale: 7,410 posts
Joined: December 04, 2010
KitMaker: 11,666 posts
AeroScale: 7,410 posts
Posted: Sunday, April 12, 2015 - 06:43 PM UTC
Rob,
Those two IPs do look rather nice.
Jasper,
Outstanding. Very nicely done.
Darrell,
Sorry to hear that. Isn't there any commercial AM decals you can use?
Joel
Those two IPs do look rather nice.
Jasper,
Outstanding. Very nicely done.
Darrell,
Sorry to hear that. Isn't there any commercial AM decals you can use?
Joel
Posted: Monday, April 13, 2015 - 05:47 AM UTC
Commercial decals aren't made for my aircraft choice. It was(is) in the colours of the Ontario Ministry of Natural Resources. I will still try to finish before the deadline.
Joel_W
Associate Editor
New York, United States
Joined: December 04, 2010
KitMaker: 11,666 posts
AeroScale: 7,410 posts
Joined: December 04, 2010
KitMaker: 11,666 posts
AeroScale: 7,410 posts
Posted: Monday, April 13, 2015 - 05:22 PM UTC
Quoted Text
Commercial decals aren't made for my aircraft choice. It was(is) in the colours of the Ontario Ministry of Natural Resources. I will still try to finish before the deadline.
Darrell,
WTG. I'm looking forward to it.
Joel
Posted: Monday, April 13, 2015 - 06:47 PM UTC
Darrell, now you really got my interest. Hope we will get to see your bird in this campaign. Otherwise in another campaign.
Sounds very unique!
Sounds very unique!
Posted: Sunday, April 19, 2015 - 01:00 PM UTC
Thanks Joel.
Here is a better shot of the radar scope and the cockpit, armament bay installed.
Cheers Rob.
Here is a better shot of the radar scope and the cockpit, armament bay installed.
Cheers Rob.
Posted: Monday, April 20, 2015 - 03:36 AM UTC
Decals on the 707s.
still working on removable wings. I might have to give it up.
still working on removable wings. I might have to give it up.
Joel_W
Associate Editor
New York, United States
Joined: December 04, 2010
KitMaker: 11,666 posts
AeroScale: 7,410 posts
Joined: December 04, 2010
KitMaker: 11,666 posts
AeroScale: 7,410 posts
Posted: Tuesday, April 21, 2015 - 05:24 PM UTC
Jonathan,
Both aircraft fuselages look fantastic with the decals on. Really looking forward to seeing them with their wings attached.
Joel
Both aircraft fuselages look fantastic with the decals on. Really looking forward to seeing them with their wings attached.
Joel
air-aset
Ecuador
Joined: March 25, 2004
KitMaker: 84 posts
AeroScale: 42 posts
Joined: March 25, 2004
KitMaker: 84 posts
AeroScale: 42 posts
Posted: Wednesday, April 22, 2015 - 04:31 AM UTC
As always wonderful builds all around!!!!!!!
Hi Carlos nice seeing You over here too looking forward to see Your I-16.
Primed and ready to go!!!
Dark Euro Gray
Dark Green
Finally Medium Green
Hi Carlos nice seeing You over here too looking forward to see Your I-16.
Primed and ready to go!!!
Dark Euro Gray
Dark Green
Finally Medium Green