1⁄72
Tuesday, May 17, 2016 - 12:06 AM UTC
Special Hobby have sent us details of their latest resin detail sets released under their CMK banner. All in 1:72 this month, the sets cover diverse subjects from the Bristol Blenheim through to the Mirage F.1B.
129-7346 - Blenheim Mk. I - Engine set for Airfix - 17,50 €
Detailed resin set portraying the Blenheim engine, meant to fit the new Airfix model. As the right-hand and left-hand side engine installations are identical, it is up to the modeller which side he wishes to use the set for. The set comes with detailed resin cast engine and its components, engine bearers, air intakes, bulkhead, cowling panels with reinforcements on their inside and also with the typical cowling nose ring designed one-piece with the exhaust tubes.
129-7347 - Harrier GR.1 - Control Surfaces Set for Airfix kit - 10,30 €
This control surfaces set offers the modeller a pair of ailerons, wing flaps and a tail fin with a separate rudder. All the parts panel lines and inspection hatches are finely rendered.
129-F72306 - Two Fouga Magister Pilots and a Mechanic for 1/72 SH kit - 10,30 €
The new Special Hobby Fouga Magister kit will benefit not only from addition of nicely detailed resin wheels (CMK set no. Q72228) or pilots´ seats (Q72227), the modeller also may wish to add a trio of convincingly sculpted figures, two of which are the pilots and the last one depicts a ground crew member.
129-Q72261 - Barrels for 0.303 Browning machine guns (12 pcs) - 4,30 €
In total 12 barrels come with this set, in two different lengths, designed to fit WW2 .303 Browning machine guns replicas in your model. These barrels could be used to replace not very nicely reproduced plastic barrels of fixed machine guns mainly in such models as the Gladiator, Hurricane Mk.IIb or Anson.
129-Q72255 - Mirage F.1B - MB Mk. 10 Seat (2pcs) for SH kit - 10,30 €
Nicely detailed pair of hot seats tailored to fit your Mirage F.1B (two-seater) model produced by Special Hobby. The set brings also a PE-fret with seat belts and some other tiny details.
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
Detailed resin set portraying the Blenheim engine, meant to fit the new Airfix model. As the right-hand and left-hand side engine installations are identical, it is up to the modeller which side he wishes to use the set for. The set comes with detailed resin cast engine and its components, engine bearers, air intakes, bulkhead, cowling panels with reinforcements on their inside and also with the typical cowling nose ring designed one-piece with the exhaust tubes.
129-7347 - Harrier GR.1 - Control Surfaces Set for Airfix kit - 10,30 €
This control surfaces set offers the modeller a pair of ailerons, wing flaps and a tail fin with a separate rudder. All the parts panel lines and inspection hatches are finely rendered.
129-F72306 - Two Fouga Magister Pilots and a Mechanic for 1/72 SH kit - 10,30 €
The new Special Hobby Fouga Magister kit will benefit not only from addition of nicely detailed resin wheels (CMK set no. Q72228) or pilots´ seats (Q72227), the modeller also may wish to add a trio of convincingly sculpted figures, two of which are the pilots and the last one depicts a ground crew member.
129-Q72261 - Barrels for 0.303 Browning machine guns (12 pcs) - 4,30 €
In total 12 barrels come with this set, in two different lengths, designed to fit WW2 .303 Browning machine guns replicas in your model. These barrels could be used to replace not very nicely reproduced plastic barrels of fixed machine guns mainly in such models as the Gladiator, Hurricane Mk.IIb or Anson.
129-Q72255 - Mirage F.1B - MB Mk. 10 Seat (2pcs) for SH kit - 10,30 €
Nicely detailed pair of hot seats tailored to fit your Mirage F.1B (two-seater) model produced by Special Hobby. The set brings also a PE-fret with seat belts and some other tiny details.
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
Click Star to Rate
2 readers have rated this story.
THIS STORY HAS BEEN READ 4,650 TIMES.
CMK Reviews | MORE |
Re 2005 Upgrades by Rowan Baylis | |
Vampire Main and Nose Wheels by Tim Hatton | |
A-4 Skyhawk Wheels by Tim Hatton | |
J2M3 Wheel Wells and Covers by Frederick Boucher | of 1 ratings, 100% found this helpful | |
J2M3 Raiden Control Surfaces by Frederick Boucher | of 1 ratings, 100% found this helpful | |
J2M3 Raiden Armament by Frederick Boucher | of 1 ratings, 100% found this helpful | |
J2M3 Raiden Cockpit Set by Frederick Boucher | of 1 ratings, 100% found this helpful | |
P51-D Metal Drop Tanks by Rowan Baylis | |
P-51D Undercarriage Sets by Rowan Baylis | |
P-51D Cockpit Details by Rowan Baylis | of 1 ratings, 100% found this helpful | |
P-51D Mustang Seats by Rowan Baylis | |
P-51D Mustang Wheel Sets by Rowan Baylis | |
RAF Pilot, Groundcrew & Monkey by Tim Hatton | |
P-40N Engine Set by Tim Hatton | |
Brass Chains by Rowan Baylis | of 1 ratings, 100% found this helpful |
Comments