1⁄72
Thursday, December 21, 2017 - 02:17 AM UTC
Special Hobby have announced a bundle of new detail sets for their 1:72 P-40 kits as part of their CMK range of resin upgrades.
Q72297 - 1/72 P-40 Wheels – Cross Tread
The set contains all new wheels with cross tread tyres, the wheel hubs come as separate casts and the set offers two styles of the wheels, either with the hub covers on or without the covers. 3D designed, 3D-printed master parts.
Price: 3.70 Euros
Q72298 - 1/72 P-40 Wheels – Diamond and Hole Tread
The set contains all new wheels with diamond and hole style tread, the wheel hubs come as separate casts and the set offers two styles of the wheels, either with the hub covers on or without the covers. 3D designed, 3D-printed master parts.
Price: 3.70 Euros
Q72300 - 1/72 P-40N-5 through N-40 Seat with Belts
For the new Special Hobby P-40N kits (later blocks), but not just for these kits, has been designed this set which brings the modeller a new cast pilot’s seat with belts. 3D designed, the seat master pattern was produced using a 3D printer.
Price: 3.70 Euros
Q72301 - 1/72 P-40 Cockpit Sidewalls and Control Column
The new Special Hobby P-40 Warhawk kits will benefit from the addition of this set which offers the modeller new and nicely detailed cockpit sidewalls and a new control stick. The cast part replace directly and easily the original styrene items. Not much surgery needed. The master parts were 3D designed and printed.
Price: 5.70 Euros
Q72303 - 1/72 Kittyhawk IV Seat with Sutton Harness
The new Special Hobby models of the Kittyhawk IV (basically a P-40N with some British equipment), but not just these kits, will no doubt benefit from the new pilot’s seat cast with the quite distinctive British Sutton harness. As many of our recent sets, also this one has been 3D designed and the master parts produced on a 3D printer.
Price: 3.70 Euros
Q72293 - 1/72 P-40E, F, K, L, M and N-1 Seat
This new resin cast seat has been tailored to fit the new Special Hobby P-40 kits in the E, K, M and N-1 version and can be used with earlier Special Hobby P-40F and L versions too as well as with other P-40 kits. 3D designed, master parts 3D printed. The seat is plain, with no belts.
Price: 2.70 Euros
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
The set contains all new wheels with cross tread tyres, the wheel hubs come as separate casts and the set offers two styles of the wheels, either with the hub covers on or without the covers. 3D designed, 3D-printed master parts.
Price: 3.70 Euros
Q72298 - 1/72 P-40 Wheels – Diamond and Hole Tread
The set contains all new wheels with diamond and hole style tread, the wheel hubs come as separate casts and the set offers two styles of the wheels, either with the hub covers on or without the covers. 3D designed, 3D-printed master parts.
Price: 3.70 Euros
Q72300 - 1/72 P-40N-5 through N-40 Seat with Belts
For the new Special Hobby P-40N kits (later blocks), but not just for these kits, has been designed this set which brings the modeller a new cast pilot’s seat with belts. 3D designed, the seat master pattern was produced using a 3D printer.
Price: 3.70 Euros
Q72301 - 1/72 P-40 Cockpit Sidewalls and Control Column
The new Special Hobby P-40 Warhawk kits will benefit from the addition of this set which offers the modeller new and nicely detailed cockpit sidewalls and a new control stick. The cast part replace directly and easily the original styrene items. Not much surgery needed. The master parts were 3D designed and printed.
Price: 5.70 Euros
Q72303 - 1/72 Kittyhawk IV Seat with Sutton Harness
The new Special Hobby models of the Kittyhawk IV (basically a P-40N with some British equipment), but not just these kits, will no doubt benefit from the new pilot’s seat cast with the quite distinctive British Sutton harness. As many of our recent sets, also this one has been 3D designed and the master parts produced on a 3D printer.
Price: 3.70 Euros
Q72293 - 1/72 P-40E, F, K, L, M and N-1 Seat
This new resin cast seat has been tailored to fit the new Special Hobby P-40 kits in the E, K, M and N-1 version and can be used with earlier Special Hobby P-40F and L versions too as well as with other P-40 kits. 3D designed, master parts 3D printed. The seat is plain, with no belts.
Price: 2.70 Euros
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
Click Star to Rate
Only 1 reader has rated this.
THIS STORY HAS BEEN READ 2,951 TIMES.
CMK Reviews | MORE |
Re 2005 Upgrades by Rowan Baylis | |
Vampire Main and Nose Wheels by Tim Hatton | |
A-4 Skyhawk Wheels by Tim Hatton | |
J2M3 Wheel Wells and Covers by Frederick Boucher | of 1 ratings, 100% found this helpful | |
J2M3 Raiden Control Surfaces by Frederick Boucher | of 1 ratings, 100% found this helpful | |
J2M3 Raiden Armament by Frederick Boucher | of 1 ratings, 100% found this helpful | |
J2M3 Raiden Cockpit Set by Frederick Boucher | of 1 ratings, 100% found this helpful | |
P51-D Metal Drop Tanks by Rowan Baylis | |
P-51D Undercarriage Sets by Rowan Baylis | |
P-51D Cockpit Details by Rowan Baylis | of 1 ratings, 100% found this helpful | |
P-51D Mustang Seats by Rowan Baylis | |
P-51D Mustang Wheel Sets by Rowan Baylis | |
RAF Pilot, Groundcrew & Monkey by Tim Hatton | |
P-40N Engine Set by Tim Hatton | |
Brass Chains by Rowan Baylis | of 1 ratings, 100% found this helpful |
Comments