Saturday, September 29, 2007 - 07:38 PM UTC
The name Radu Brinzan should need little introduction - he's the master pattern maker behind some of the superb resin and photo-etch kits and accessories produced by EagleParts and MDC.
But as well as producing patterns, Radu has also developed a unique new PE folding tool - the Flip-R10.
But as well as producing patterns, Radu has also developed a unique new PE folding tool - the Flip-R10.
The Flip-R10 works by the same principle as a hinged bending brake. The photoetched parts are held in place between the base and the bending attachment, then they are bent by pivoting the hinged bending plate. The tool can also be used in the more "traditional" manner whereby the bending plate is used as a blade to bend the parts.
The Flip-R10 comes flat packed and is made from stainless steel. It can handle photoetched parts up to a length of 10 cm (approx 4 in). In most cases, fingertip pressure is all that's needed to hold the parts securely - otherwise, small bulldog clips (not provided) can be attached as seen in the accompanying photos.
You can watch a video of the Flip-R10 in action HERE
The Flip-R10 is priced at EUR 25.00 and is available directly from Radu Brinzan via his E-Bay shop.
Alternatively, the Flip-R10 is also distributed by the following on-line stores:
Net Merchants
MDC
Buffie's Best
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
The Flip-R10 comes flat packed and is made from stainless steel. It can handle photoetched parts up to a length of 10 cm (approx 4 in). In most cases, fingertip pressure is all that's needed to hold the parts securely - otherwise, small bulldog clips (not provided) can be attached as seen in the accompanying photos.
You can watch a video of the Flip-R10 in action HERE
The Flip-R10 is priced at EUR 25.00 and is available directly from Radu Brinzan via his E-Bay shop.
Alternatively, the Flip-R10 is also distributed by the following on-line stores:
Net Merchants
MDC
Buffie's Best
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
Click Star to Rate
2 readers have rated this story.
THIS STORY HAS BEEN READ 13,465 TIMES.
RB Productions Reviews | MORE |
I.A.R.80 Decals by Rowan Baylis | |
Pico Saws by Rowan Baylis | of 1 ratings, 100% found this helpful | |
I.A.R.81C Decals by Rowan Baylis | |
Scribe-R File by Rowan Baylis | of 4 ratings, 100% found this helpful | |
Romanian Bf 109E Parts 1 & 2 by Rowan Baylis | |
Wood grain stencil by Entoni Seperic | of 9 ratings, 89% found this helpful | |
Romanian Insignia by Rowan Baylis | |
1:24 Sutton QK by Andrew Moore | of 1 ratings, 100% found this helpful | |
Micro Saws by Rowan Baylis | of 5 ratings, 100% found this helpful | |
German WW1 Seat Belts by Rowan Baylis | of 3 ratings, 100% found this helpful | |
Sutton Harnesses by Rowan Baylis | of 1 ratings, 100% found this helpful | |
New Scribe-R Blades by Rowan Baylis | of 1 ratings, 100% found this helpful | |
Luftwaffe Seatbelts by Rowan Baylis | of 1 ratings, 100% found this helpful | |
Rivet-R by Rowan Baylis | of 2 ratings, 100% found this helpful | |
Contour Saw Set by Rowan Baylis | of 3 ratings, 100% found this helpful |
Comments