1⁄32
Tuesday, March 26, 2019 - 12:58 PM UTC
HGW has released a set of seat belts for the WNW 1/32 scale Albatros D.V / D.Va
HGW has released textile seat belts designed for the 1/32 scale Albatros D.V / D.Va by Wingnut Wings. Belts are made from microfibre and in combination with the included photo etched buckles give a highly realistic look to the cockpit area. It is possible to make seat belts fully functional: unbuckle and unfasten them. The seat belts are made with special micro-textile foil and the set contains seat belts for two single-seater aircraft. The textile parts are prepared using filters leading to darkening shades and they are also waterproofed and resistant to normal non aggressive modeller preparations. The photo-etched parts were developed in cooperation with Eduard Company.
Instructions
This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that etches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
132611 - Albatros D.V / D.Va – Seatbelts – 1/32
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here – on AEROSCALE.
Instructions
This set contains printed and photoetched parts. Choose appropriate shade of belt and trim on dotted line using very sharp knife. Trim to required length according to the type of seatbelt. Using fingers munch into little ball. Flatten out and thread through photoetched parts. Glue using white glue, do not use chemical glue that etches plastic. When applying, look at photos of cockpit of individual machines. After glued and shaped, paint with matt varnish.
132611 - Albatros D.V / D.Va – Seatbelts – 1/32
Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here – on AEROSCALE.
Click Star to Rate
2 readers have rated this story.
THIS STORY HAS BEEN READ 1,580 TIMES.
HGW Reviews | MORE |
HGW Felixstowe by Stephen T. Lawson | of 1 ratings, 100% found this helpful | |
Me 163 Komet harness set by Stephen T. Lawson | |
N1K2-J Shiden Kai (George) by Stephen T. Lawson | of 1 ratings, 0% found this helpful | |
Seatbelts P-47D Thunderbolt by Stephen T. Lawson | |
Iljuschin II-2 harness set by Stephen T. Lawson | |
AMC DH 9 seatbelts by Stephen T. Lawson | |
Rol. D.VIb seatbelts by Stephen T. Lawson | |
Scale Seatbelts WWII by Stephen T. Lawson | of 1 ratings, 100% found this helpful | |
Scale Seatbelts WWII by Stephen T. Lawson | of 1 ratings, 100% found this helpful | |
Scale Seatbelts WWI by Stephen T. Lawson | of 1 ratings, 100% found this helpful | |
Scale Seatbelts WWII by Stephen T. Lawson | |
Rivet head decal sheets by Stephen T. Lawson | of 2 ratings, 100% found this helpful | |
Wood Grain decals by Stephen T. Lawson | of 1 ratings, 100% found this helpful | |
Albatros D. Harness sets by Stephen T. Lawson | of 2 ratings, 100% found this helpful | |
WWI Bezels by Stephen T. Lawson | of 1 ratings, 100% found this helpful |
Comments