132
Wednesday, June 06, 2012 - 07:03 AM UTC
Roy Sutherland has sent us details of his latest resin BarracudaCast resin upgrade sets - a selection of superbly detailed replacement wheels and tyres for any 1:32 Mustang:
Barracuda Studios is proud to announce the release of 5 new products in the BarracudaCast resin detail set line. These sets are now up on the website and available for pre-order. Shipping will begin on Friday, June 8th.

These sets are intended for the superb new Tamiya P-51D Mustang in 1/32nd scale, but will improve any kit of any variant of the P-51 family, including the A-36 Apache and all of the Allison engined Mustangs as well. The first 4 sets consist of resin tires in 4 different tread patterns to replace the soft rubber tires found in the Tamiya kit. For those not building the Tamiya Mustang, we also offer a separate set of resin wheel hubs matched to these new tires that will allow their use with any kit of the Mustang in this scale. These tires have been thoroughly researched and matched to period photos of real tire patterns on Mustangs flying in WWII. Thanks to Mustang expert Christian Alamy for his help in the researching of these new products.

BR32029 1/32 P-51 Mustang Diamond Tread Tires

This set contains new, more accurate diamond tread tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These seamless resin parts have superb tread detail, with 7 diamonds in a single row to match the period photos, and are both sandable and paintable. Four styles are available, and you can even mix and match them, as was common practice on the real aircraft. For modelers building an A-36 Apache or P-51A,B,C,D or K from Hasegawa, Trumpeter, Dragon, Hobbycraft or Monogram, you will need our resin wheel hubs 32034 as well.

BR32030 1/32 P-51 Mustang Oval Tread Pattern Tires

This set contains new oval tread pattern tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These seamless resin parts have superb tread detail based on wartime photos of real tires including the very subtle ovals on the sidewalls, and are both sandable and paintable. Four styles are available, and you can even mix and match them, as was common practice on the real aircraft. For modelers building an A-36 Apache or P-51A,B,C,D or K from Hasegawa, Trumpeter, Dragon, Hobbycraft or Monogram, you will need our resin wheel hubs 32034 as well.

BR32031 1/32 P-51 Mustang Octagonal Tread Tires

This set contains new hexagonal tread pattern tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These seamless resin parts have superb tread detail, and are both sandable and paintable. Four styles are available, and you can even mix and match them, as was common practice on the real aircraft. For modelers building an A-36 Apache or P-51A,B,C,D or K from Hasegawa, Trumpeter, Dragon, Hobbycraft or Monogram, you will need our resin wheel hubs 32034 as well.

BR32032 1/32 P-51 Mustang Block Tread Tires

This set contains new staggered block tread pattern tires that directly replace the tires in the Tamiya kit. The problem with the soft vinyl tires in the kit is that the seams are very difficult to remove, and they tend to attract dirt and dust. These seamless resin parts have superb tread detail, and are both sandable and paintable. Four styles are available, and you can even mix and match them, as was common practice on the real aircraft. For modelers building an A-36 Apache or P-51A,B,C,D or K from Hasegawa, Trumpeter, Dragon, Hobbycraft or Monogram, you will need our resin wheel hubs 32034 as well.

BR32034 - P-51 Mustang Mainwheel Hubs

This set contains a pair of accurate resin mainwheel hubs designed to fit our resin tires, for those not building the Tamiya P-51 kit. For modelers building an A-36 Apache or P-51A,B,C,D or K from Hasegawa, Trumpeter, Dragon, Hobbycraft or Monogram and using our resin tires BR32029, BR32030, BR32031, BR32032. These hubs are not intended for the Tamiya kit, as the mounting to the gearleg is different, although you could modify the Tamiya gearlegs to fit these resin hubs if you so desired.

All 5 sets are currently in production, and we are taking orders now at our website:

http://barracudacals.com/index.php

Happy modelling! Roy


Please remember, when contacting retailers or manufacturers, to mention that you saw their products highlighted here - on AEROSCALE.
Click Star to Rate
2 readers have rated this story.
Get a daily email with links to all our latest news, reviews, and features.

THIS STORY HAS BEEN READ 4,954 TIMES.
ADVERTISEMENT

Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
Barracuda Studios ReviewsMORE
Bf 109G/K Tall Tailwheel First Look
by Rowan Baylis
Bf 109E/F Mainwheels First Look
by Rowan Baylis
Fw 190 Mainwheels First Look
by Rowan Baylis
Hawker Hurricane Mainwheels In-Box Review
by Rowan Baylis
Fw 190 A, F & D Cockpit First Look
by Rowan Baylis
Tempest Ailerons and Elevators First Look
by Rowan Baylis
F6F Hellcat Wheels In-Box Review
by Rowan Baylis
Sea Fury Wheel Well In-Box Review
by Rowan Baylis
Sea Fury Engine & Spinner In-Box Review
by Rowan Baylis
Tempest Seat With Harness First Look
by Rowan Baylis
Tempest Exhausts First Look
by Rowan Baylis
Tempest Mainwheels First Look
by Rowan Baylis
Tempest Mk. V Spinner First Look
by Rowan Baylis
Tempest Mk. V Intake First Look
by Rowan Baylis
Fw 190 Mainwheels First Look
by Rowan Baylis

ADVERTISEMENT