Air Campaigns
Want to start or join a group build? This is where to start.
OFFICIAL: Club Med Campaign
cinzano
_VISITCOMMUNITY
Indiana, United States
Joined: January 13, 2009
KitMaker: 419 posts
AeroScale: 378 posts
Posted: Saturday, February 08, 2014 - 09:38 AM UTC
Some work today on the firewall and motor mounts. Need to add a few more bits then drill holes for plumbing, after that its painting then back to the cockpit.



Cheers,
Fred
North4003
_VISITCOMMUNITY
England - West Midlands, United Kingdom
Joined: August 01, 2012
KitMaker: 960 posts
AeroScale: 391 posts
Posted: Saturday, February 08, 2014 - 09:54 AM UTC
Fred, great looking insides.
Robbd01
#323
_VISITCOMMUNITY
Arizona, United States
Joined: February 13, 2013
KitMaker: 791 posts
AeroScale: 213 posts
Posted: Tuesday, February 11, 2014 - 12:31 PM UTC
It has been awhile since I posted an update on my part of this campaign. It is a little behind. Since this pic I have mostly finished picking out the details of the cockpits of both aircraft. Just waiting to add PE seatbelts. The fuselage halves have been glued together and I am in the process of putting the cockpits parts together from the bottom. It looked easier then gluing everything to one fuselage half. I will have more pics later. Maybe just before I start fiddling with the wings. This is my first kit from Sword and I am still holding judgment still on the assembly.



Cheers
North4003
_VISITCOMMUNITY
England - West Midlands, United Kingdom
Joined: August 01, 2012
KitMaker: 960 posts
AeroScale: 391 posts
Posted: Tuesday, February 11, 2014 - 03:20 PM UTC
Robbie, good to hear from you. I'm behind and hope to do some catch up in a few days.
cinzano
_VISITCOMMUNITY
Indiana, United States
Joined: January 13, 2009
KitMaker: 419 posts
AeroScale: 378 posts
Posted: Saturday, February 15, 2014 - 05:29 PM UTC


Still plugging away. Will add a couple of extra hoses but the landing gear bay has been scratch built and is more or less complete.

Cheers,
Fred
dcandal
_VISITCOMMUNITY
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
AeroScale: 688 posts
Posted: Sunday, February 16, 2014 - 09:49 AM UTC
Here I continue with this model,









cinzano
_VISITCOMMUNITY
Indiana, United States
Joined: January 13, 2009
KitMaker: 419 posts
AeroScale: 378 posts
Posted: Sunday, February 16, 2014 - 11:41 AM UTC
started adding a little pigment to the tub.
Beauslx
_VISITCOMMUNITY
Nevada, United States
Joined: August 28, 2013
KitMaker: 159 posts
AeroScale: 116 posts
Posted: Sunday, February 23, 2014 - 05:36 PM UTC
I hate to do this but I have to drop out. Just to much happening right now.
Jessie_C
_VISITCOMMUNITY
British Columbia, Canada
Joined: September 03, 2009
KitMaker: 6,965 posts
AeroScale: 6,247 posts
Posted: Sunday, February 23, 2014 - 07:31 PM UTC
We understand that Life sometimes happens. Once you've sorted things out, Aeroscale will still be here and building models will still be fun.
North4003
_VISITCOMMUNITY
England - West Midlands, United Kingdom
Joined: August 01, 2012
KitMaker: 960 posts
AeroScale: 391 posts
Posted: Wednesday, February 26, 2014 - 01:15 AM UTC
Our campaign will be beginning its' last month, the gallery has entries from Spain, Italy and Turkey. Time to work toward completion on your entry, mine included.
dcandal
_VISITCOMMUNITY
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
AeroScale: 688 posts
Posted: Thursday, February 27, 2014 - 10:36 AM UTC
I´m preparing the flaps in this step,





















GhostHawk
_VISITCOMMUNITY
Cordoba, Argentina
Joined: January 27, 2011
KitMaker: 268 posts
AeroScale: 264 posts
Posted: Thursday, February 27, 2014 - 12:36 PM UTC
Very nice Daniel...!!! Very Nice...

Diego
dcandal
_VISITCOMMUNITY
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
AeroScale: 688 posts
Posted: Thursday, February 27, 2014 - 01:01 PM UTC
Thanks Diego.

Muchas gracias Diego
macotra4
_VISITCOMMUNITY
Illinois, United States
Joined: January 25, 2010
KitMaker: 110 posts
AeroScale: 88 posts
Posted: Thursday, February 27, 2014 - 03:37 PM UTC
Daniel,
can you tell me what king of glue are you using (I know it is a CA... your work is amazing and very very clean. I can never get PE parts to be glued so clean
dcandal
_VISITCOMMUNITY
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
AeroScale: 688 posts
Posted: Friday, February 28, 2014 - 12:28 AM UTC
Thanks for your comment Tom.
The ciano I use is this one,



It is the least dense.
dcandal
_VISITCOMMUNITY
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
AeroScale: 688 posts
Posted: Friday, March 07, 2014 - 11:48 PM UTC
Preparing th landing gear and adding some PE to it,













North4003
_VISITCOMMUNITY
England - West Midlands, United Kingdom
Joined: August 01, 2012
KitMaker: 960 posts
AeroScale: 391 posts
Posted: Sunday, March 09, 2014 - 04:12 AM UTC
Daniel, great detail work being done. I'm amazed at the level of craftsmanship among the Kit Maker modeling community.
North4003
_VISITCOMMUNITY
England - West Midlands, United Kingdom
Joined: August 01, 2012
KitMaker: 960 posts
AeroScale: 391 posts
Posted: Sunday, March 09, 2014 - 04:15 AM UTC
I need to work on my Fairy Battle today, it is assembled but needs filing and paint. The end of the Club Med Campaign is drawing near with 21 days to go.
tinbanger
_VISITCOMMUNITY
Ontario, Canada
Joined: February 04, 2008
KitMaker: 2,507 posts
AeroScale: 1,814 posts
Posted: Sunday, March 09, 2014 - 09:59 AM UTC
Drawings of the under carriage in the Hobby Craft model are
not easy to follow and looking at photos on the web showed covers locations to be drawn wrong.I have a Eduard I-16 Type 10 and the drawing (on right) in photos shows how to do it!

Onward!
cinzano
_VISITCOMMUNITY
Indiana, United States
Joined: January 13, 2009
KitMaker: 419 posts
AeroScale: 378 posts
Posted: Wednesday, March 12, 2014 - 12:56 AM UTC
Nice work on the Macchi, Daniel!

Just got back from holiday. Totally did not realize we are down to the last month. Not withdrawing, but I'm enjoying the progress on my MC.200. Don't feel like rushing, so if I make the deadline I'll get my ribbon. If not it, will be finished. (and hopefully to my liking).

I'm going to continue to post progress shots even if I miss the deadline.

Cheers,
Fred
dcandal
_VISITCOMMUNITY
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
AeroScale: 688 posts
Posted: Thursday, March 13, 2014 - 12:27 AM UTC
Thanks for your comments Brent and Frederick.

Here I have the model prepared for the painting,

GhostHawk
_VISITCOMMUNITY
Cordoba, Argentina
Joined: January 27, 2011
KitMaker: 268 posts
AeroScale: 264 posts
Posted: Thursday, March 13, 2014 - 02:20 AM UTC
You are closer Daniel... Keep pushing forward...!!!

Diego
phumbles
_VISITCOMMUNITY
Australia
Joined: June 14, 2013
KitMaker: 82 posts
AeroScale: 81 posts
Posted: Monday, March 17, 2014 - 09:40 PM UTC
I am not going to be able to build anything for this campaign. Congratulations to everyone for some glorious models. Phil
dcandal
_VISITCOMMUNITY
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
AeroScale: 688 posts
Posted: Tuesday, March 18, 2014 - 05:44 AM UTC
Here you can see I had painted the nose with RLM 04 and you can also see that I gave a preshade to all the panels,

dcandal
_VISITCOMMUNITY
Buenos Aires, Argentina
Joined: September 07, 2006
KitMaker: 918 posts
AeroScale: 688 posts
Posted: Wednesday, March 19, 2014 - 12:21 AM UTC
More photos of the painting process,