Air Campaigns
Want to start or join a group build? This is where to start.
OFFICIAL: Battle of Britain 75 Campaign
ZAPanzer
_VISITCOMMUNITY
North-West, South Africa
Joined: September 12, 2012
KitMaker: 88 posts
AeroScale: 39 posts
Posted: Thursday, May 21, 2015 - 11:37 AM UTC

Quoted Text

Hi

Damn my big mistake!!! I have another Spit at home will have to check which varient.

Rob



Michael thanks for pointing that out, I was so eager to do that build that I went into it without doing any research .
I do have an Airfix Spitfire I/II but I don't know if time is going to catch up with me(plenty of active campaigns).
I'll stay in for now to keep the option open.
Cheers
Rob
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 5,026 posts
AeroScale: 2,811 posts
Posted: Sunday, May 24, 2015 - 11:21 PM UTC
@ Michael: your Hurricane kit version looks interesting, especially that spar.

@ Peter: your 109 paint job really came out good.

@ Richard: I had built that kit for the HAIRY STICK campaign and was pleased with the construction and the final outcome so I will look forward to your photos.

QUESTION: I have prepped my Airfix Hurri for paint, but have a dilemma. I am using the kits scheme for the No. 32 Squadron. I have Tamiya XF21 and Humbrol 90 for the undersurfaces. Which should be used I cannot make up my mind.

Bob
noddy927
_VISITCOMMUNITY
Scotland, United Kingdom
Joined: February 15, 2013
KitMaker: 1,273 posts
AeroScale: 200 posts
Posted: Monday, May 25, 2015 - 02:39 AM UTC
Thanks for the comments Bob. Sorry I can't help with the paint choice mate.

Pete
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 5,026 posts
AeroScale: 2,811 posts
Posted: Monday, May 25, 2015 - 02:42 AM UTC
The weather here has us under tornado and flash flood warnings so I get to work on several builds today:

the progress on the Airfix Hurricane (early kit version AO4102





getting ready for paint.
BoiseBlade
#523
_VISITCOMMUNITY
Idaho, United States
Joined: February 28, 2014
KitMaker: 342 posts
AeroScale: 250 posts
Posted: Tuesday, May 26, 2015 - 04:05 AM UTC
Ok, I finally finished the interior.
Bombsite and other things scratch built.
I am trying to take some pics a little closer like some of you guys how you get a detail pic.
I am getting better. But I think when I resize them down the get less definition

Here is the Scratch Control Panel and the back wiring. Not a very good image.
PeeJay74
#363
_VISITCOMMUNITY
Pennsylvania, United States
Joined: January 08, 2014
KitMaker: 425 posts
AeroScale: 401 posts
Posted: Tuesday, May 26, 2015 - 05:45 AM UTC
Michael,

does the new tool Hurricane include the arrestor hook or only the lower fuselage housing for it? I am hoping to be able to build one into an early Sea Hurricane.
ZAPanzer
_VISITCOMMUNITY
North-West, South Africa
Joined: September 12, 2012
KitMaker: 88 posts
AeroScale: 39 posts
Posted: Tuesday, May 26, 2015 - 03:22 PM UTC
Hi

After my mix up with the Sailour Malan Spitfire I'm going to try this instead

 photo WP_20150526_002_zpssmwvx9ls.jpg

Now a first for me, I'm going to build this Airfix Spitfire, an Airfix Hurricane for the Airfix campaign and complete my Tamiya Sailour Malan Spitfire at the same time
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,909 posts
AeroScale: 2,904 posts
Posted: Tuesday, May 26, 2015 - 05:32 PM UTC

Quoted Text

Michael,

does the new tool Hurricane include the arrestor hook or only the lower fuselage housing for it? I am hoping to be able to build one into an early Sea Hurricane.



Paul,

It has the hook too, as well as the spools for the MAC catapult IIRC. I see further boxings on the horizon, but if you have the decals the parts are there.

Michael
PeeJay74
#363
_VISITCOMMUNITY
Pennsylvania, United States
Joined: January 08, 2014
KitMaker: 425 posts
AeroScale: 401 posts
Posted: Tuesday, May 26, 2015 - 06:32 PM UTC
Excellent! Yet another reason to pick one up. I do indeed have decals for her, Aeromaster's Sea Hurricanes at War. Everything I have seen of this kit gives me the impression Airfix have produced a real gem.
windysean
_VISITCOMMUNITY
Wisconsin, United States
Joined: September 11, 2009
KitMaker: 1,917 posts
AeroScale: 563 posts
Posted: Tuesday, May 26, 2015 - 10:23 PM UTC
Whoa, Jeff! That's some fine work. That cockpit looks good enough to climb right in.
-Sean H.
noddy927
_VISITCOMMUNITY
Scotland, United Kingdom
Joined: February 15, 2013
KitMaker: 1,273 posts
AeroScale: 200 posts
Posted: Thursday, May 28, 2015 - 05:30 PM UTC
Nice work Jeff, it does look rather real. Look forward to more from yourself.


Pete
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 5,026 posts
AeroScale: 2,811 posts
Posted: Friday, May 29, 2015 - 10:02 PM UTC
Jeff: nice work on the interior, I cannot wait to see paint on this a/c.

I had a little time to try to fix my a/b and painted the undersurface of the Hurricane.

BoiseBlade
#523
_VISITCOMMUNITY
Idaho, United States
Joined: February 28, 2014
KitMaker: 342 posts
AeroScale: 250 posts
Posted: Friday, June 05, 2015 - 07:54 AM UTC
Here is where I am at now.
I built the engines and added plumbing to them.
I filled in the Engine Cowl flaps as the 17z did not have individual sections for the cowl.
I put the wings on and filled and sanded the seams.
No for the rest of the wheel wells and landing gear.



I am still debating, even though the wings are together should I cut and redo the flaps?
Just thinking since it will be on its wheels and every pic I see of DO-17s have the flap sag.
Merlin
Staff MemberSenior Editor
AEROSCALE
#017
_VISITCOMMUNITY
United Kingdom
Joined: June 11, 2003
KitMaker: 17,582 posts
AeroScale: 12,795 posts
Posted: Saturday, June 06, 2015 - 01:24 PM UTC
Hi there

Some lovely work all round so far!

I've put off starting in the knowledge that this bundle of samples designed for Airfix's new Spitfire Mk.I was inbound for Review:



I think the best way to see how they look is a dual-build for comparison, so I'll do one Spit basically OOB and the other with the goodies thrown at it:



Due to a heavy period ahead at work, it'll probably be a week or so before I can get much done.

All the best

Rowan
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,909 posts
AeroScale: 2,904 posts
Posted: Sunday, June 07, 2015 - 03:03 AM UTC
Well, I just tried preshading with a marker for the first time on my 1/72 Typhoon for the Airfix III Campaign and it went so quick that I went ahead and did the Hurri as well!

 photo preshade upper_zps6gkmzbli.jpg

 photo preshade lower_zpsgyxatdn0.jpg

Still can't draw a straight like though.

Michael
ZAPanzer
_VISITCOMMUNITY
North-West, South Africa
Joined: September 12, 2012
KitMaker: 88 posts
AeroScale: 39 posts
Posted: Sunday, June 07, 2015 - 01:14 PM UTC
Hi Michael

Please let us know how the marker works out. I have read on other sites that the marker pulls through the paint. I would be interested because it is quicker and alot less hassle than using the airbrush each time.

Regards

Rob
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,909 posts
AeroScale: 2,904 posts
Posted: Saturday, June 13, 2015 - 03:43 AM UTC

Quoted Text

Hi Michael

Please let us know how the marker works out. I have read on other sites that the marker pulls through the paint. I would be interested because it is quicker and alot less hassle than using the airbrush each time.

Regards

Rob



Rob,

I applied the marker using a Sharpie Industrial Super Permanent Ink a week ago and painted Sky using Tamiya acrylic about 6 hours ago and so far, no bleed through. We'll see how it looks tomorrow.

Michael
phantom_phanatic309
#372
_VISITCOMMUNITY
United Kingdom
Joined: March 10, 2010
KitMaker: 2,568 posts
AeroScale: 1,619 posts
Posted: Thursday, June 18, 2015 - 08:49 PM UTC
Afraid I'm going to have to drop out of this campaign and possibly a few others.
Long story short, the inevitable has happened and we have bought a house. A house that will need a lot of work and money to make it liveable. I don't really want to be making start on something large like the Dornier in case something breaks or gets lost during the move. Best to keep it boxed till then. Exciting times but it's going to mean I'll have little time at the workbench for the next couple of months.
On the plus side, I've got a room to myself for all my crap and I'm hoping to set aside an area for airbrushing and the like.
Plus I'll also be a 10 minute walk away from quite a well stocked model shop! That had little to do with choosing the house. Honest
BoiseBlade
#523
_VISITCOMMUNITY
Idaho, United States
Joined: February 28, 2014
KitMaker: 342 posts
AeroScale: 250 posts
Posted: Thursday, June 18, 2015 - 11:31 PM UTC
Congrats Stephen!
Sorry you need to drop but very understandable.
And good luck! I know the feeling. I have totally redone 3 homes before moving in. Floors, Walls, cabinets you name it. 2 were complete remodels on a 1/1 scale

But I tell you, Nothing like having your own private office for working. This house I have has finally got that setup for me.........
it was about time I told my wife of 35+ years..
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,909 posts
AeroScale: 2,904 posts
Posted: Friday, June 19, 2015 - 01:04 AM UTC
Sorry to lose you Stephen but that real life stuff comes first. Good luck on your new project!!

Michael
Bink123
_VISITCOMMUNITY
Quebec, Canada
Joined: June 23, 2008
KitMaker: 414 posts
AeroScale: 364 posts
Posted: Friday, June 19, 2015 - 01:29 AM UTC
I don't have the time to participate, but if I did I'd build a DH Tiger Moth as fitted with bombs as part of Operation Banquet.

Check out the link.

https://en.m.wikipedia.org/wiki/Operation_Banquet


I think it would be secret, so no photos available, but a generic flight school Tiger with bomb racks would suffice, I think.
phantom_phanatic309
#372
_VISITCOMMUNITY
United Kingdom
Joined: March 10, 2010
KitMaker: 2,568 posts
AeroScale: 1,619 posts
Posted: Friday, June 19, 2015 - 03:48 AM UTC
Thanks for the support and understanding. Hopefully by the end of summer we'll be done and I can get back to a few projects. I do have a Hobbyboss Me109 which will work as a quick build for this campaign if indeed I do get time.
Best of luck to everyone.
Merlin
Staff MemberSenior Editor
AEROSCALE
#017
_VISITCOMMUNITY
United Kingdom
Joined: June 11, 2003
KitMaker: 17,582 posts
AeroScale: 12,795 posts
Posted: Thursday, June 25, 2015 - 02:01 AM UTC
Hi again

I managed to finally do a bit of basic prep on the Spits today. The "Eduard" one will be flaps-down - even though that's seldom seen in photos. I'd better dig out one of the new RAF ground crew to go with it doing an inspection.

All the best

Rowan
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,909 posts
AeroScale: 2,904 posts
Posted: Saturday, June 27, 2015 - 11:58 PM UTC
OK, here's the new Airfix 1/48 Hurricane with camo colors (colours?) applied:

 photo 20150628_122516_zpsipg9fu9v.jpg

 photo 20150628_122527_zpsdjmdaawq.jpg

 photo 20150628_122546_zpsdkpqvx4c.jpg

I'm using Tamiya paints exclusively and so far no bleed through of the marker pre-shading (the underside was painted a couple of weeks ago.)

Michael
noddy927
_VISITCOMMUNITY
Scotland, United Kingdom
Joined: February 15, 2013
KitMaker: 1,273 posts
AeroScale: 200 posts
Posted: Sunday, June 28, 2015 - 01:37 AM UTC
Looking good Mike