Air Campaigns
Want to start or join a group build? This is where to start.
OFFICIAL: Devils in the Dark: Nightfighters!
vdejarnette
_VISITCOMMUNITY
Maryland, United States
Joined: February 25, 2013
KitMaker: 209 posts
AeroScale: 138 posts
Posted: Wednesday, June 12, 2013 - 02:17 AM UTC


The F-82F has been sanded and the canopies were put on yesterday. Since I was lazy about dipping the canopies in future, I tried to brush some on after the canopies were attached... When I looked a couple hours later there was a tiny piece of fuzz stuck to the inside of the radar operators canopy. Barely noticeable, but grrrr... I tried to blow compressed air through the landing gear hole on the underside with the airbrush @ 50psi... the air shook it around but didn't dislodge it. Oh well

Anyway, I will be away on business the entire last week of June so I may not finish in time. I think I definitely could with an extension through the first week of July though, so just a heads up.
atoplu
_VISITCOMMUNITY
Ontario, Canada
Joined: August 17, 2003
KitMaker: 753 posts
AeroScale: 174 posts
Posted: Wednesday, June 12, 2013 - 02:26 AM UTC
Hi here is my entry for this campaign.

1/48 Hasegawa bf-109 g6/r6n

Thanks.








amegan
#243
_VISITCOMMUNITY
England - North East, United Kingdom
Joined: March 21, 2008
KitMaker: 996 posts
AeroScale: 915 posts
Posted: Wednesday, June 12, 2013 - 02:51 AM UTC
I too may have a problem, I will be away from 22nd June to 5th July, I'll try and finish by then, but...
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,909 posts
AeroScale: 2,904 posts
Posted: Wednesday, June 12, 2013 - 05:08 AM UTC
Ayhan: Excellent work! Don't forget to post in the gallery.

I could probably be persuaded to give a small extension, but only for a week or two! Do I need to do anything official with the administrators?

Michael
Jessie_C
_VISITCOMMUNITY
British Columbia, Canada
Joined: September 03, 2009
KitMaker: 6,965 posts
AeroScale: 6,247 posts
Posted: Wednesday, June 12, 2013 - 06:04 AM UTC
It's your campaign; you get to decide when to stop giving out the ribbons. The campaign thread would stop being "official" after the stated end date, but that's no obstacle to a reasonable extension.
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,909 posts
AeroScale: 2,904 posts
Posted: Wednesday, June 12, 2013 - 06:17 AM UTC

Quoted Text

It's your campaign; you get to decide when to stop giving out the ribbons. The campaign thread would stop being "official" after the stated end date, but that's no obstacle to a reasonable extension.



Thanks Jessie!

Right, two more weeks everyone, but that's it! July 14th is the last day.

Michael
Jessie_C
_VISITCOMMUNITY
British Columbia, Canada
Joined: September 03, 2009
KitMaker: 6,965 posts
AeroScale: 6,247 posts
Posted: Wednesday, June 12, 2013 - 06:30 AM UTC

Quoted Text

July 14th is the last day.



And in celebration we storm the Bastile?
vdejarnette
_VISITCOMMUNITY
Maryland, United States
Joined: February 25, 2013
KitMaker: 209 posts
AeroScale: 138 posts
Posted: Wednesday, June 12, 2013 - 06:39 AM UTC
Thanks, I know I will have it done by the 14th! Black paint is scheduled for Friday unless something comes up.

That is a beautiful 109!
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,909 posts
AeroScale: 2,904 posts
Posted: Wednesday, June 12, 2013 - 06:52 AM UTC

Quoted Text


Quoted Text

July 14th is the last day.



And in celebration we storm the Bastile?



Oi, but at night!
Snorri23
_VISITCOMMUNITY
Ontario, Canada
Joined: March 25, 2010
KitMaker: 514 posts
AeroScale: 244 posts
Posted: Sunday, June 16, 2013 - 06:18 AM UTC
I am a bit behind the times in getting my model finished. The stretch run is upon us and I need to get mine done. I have been haphazardly looking at the models posted here. In saying that I have seen many excellent finished models and an inspiration to me. Thus my progress shots here to view. I added some appliqué armour around the cockpit. Which monogram supplied some patterns. A tad sloppy will try and tidy them up. Used Kagero's book for reference and painting suggestions. Also helped for orientating the supercharger intake.

a href="http://s863.photobucket.com/user/Snorri23/media/Bf%20110G-4R3/STH71069_zpsbf984b02.jpg.html" target="_blank"> photo STH71069_zpsbf984b02.jpg
 photo STH71076_zps870a4f6e.jpg
vdejarnette
_VISITCOMMUNITY
Maryland, United States
Joined: February 25, 2013
KitMaker: 209 posts
AeroScale: 138 posts
Posted: Monday, June 17, 2013 - 11:07 PM UTC
The Monogram F-82F is getting there, just about ready for decals.



b17-peter
#392
_VISITCOMMUNITY
Hessen, Germany
Joined: January 09, 2013
KitMaker: 696 posts
AeroScale: 608 posts
Posted: Tuesday, June 18, 2013 - 07:31 AM UTC
Well, here's my nearly complete Ta-154 A-0, have to mount the radar antennas during the next days.
Time is running....

I saw many remarkable models of you in this campaign, don't we have a phantastic hobby?

b17-peter
#392
_VISITCOMMUNITY
Hessen, Germany
Joined: January 09, 2013
KitMaker: 696 posts
AeroScale: 608 posts
Posted: Tuesday, June 18, 2013 - 07:33 AM UTC
b17-peter
#392
_VISITCOMMUNITY
Hessen, Germany
Joined: January 09, 2013
KitMaker: 696 posts
AeroScale: 608 posts
Posted: Tuesday, June 18, 2013 - 07:43 AM UTC
Should have been the first picture :-)

amegan
#243
_VISITCOMMUNITY
England - North East, United Kingdom
Joined: March 21, 2008
KitMaker: 996 posts
AeroScale: 915 posts
Posted: Tuesday, June 18, 2013 - 10:04 AM UTC
I don't think this P-61A will get any more finished before the end of the month as I am away for most of that time. I will add the three outstanding parts (lights) but apart from those and a little light weathering this one is finished






I have enjoyed this one a lot but there are a couple of weak point in the kit. The forward crew ladder and the double dipole antennae on the sides of the fuselage should have been pe, I failed to get them off the injection sprues, and there is nowhere to put nose weight hence she is a tailsitter. I think she will have to be anchored to a base. Apologies for the poor photos I'll try and get some better ones
panzerman1
_VISITCOMMUNITY
Maryland, United States
Joined: September 30, 2010
KitMaker: 430 posts
AeroScale: 75 posts
Posted: Tuesday, June 18, 2013 - 02:44 PM UTC
Andrew, Congratulations on a terrific build. She turned out marvelously....love the pin-up nose art....Hubba hubba!
That is one impressive black bird.
The diorama idea sounds great. Didn't Shep Paine make one of his incredible dioramas with a Black Widow getting maintenance done to it??? Maybe?
Again Great job.
Bill.
eMan
#298
_VISITCOMMUNITY
Hong Kong S.A.R. / 繁體
Joined: August 08, 2002
KitMaker: 1,182 posts
AeroScale: 351 posts
Posted: Tuesday, June 18, 2013 - 03:12 PM UTC
Fw190A-8/R-11 Nachtjager finished.


Siderius
_VISITCOMMUNITY
Tennessee, United States
Joined: September 20, 2005
KitMaker: 1,747 posts
AeroScale: 1,673 posts
Posted: Tuesday, June 18, 2013 - 04:09 PM UTC
Everyone on here has done great!! I have really enjoyed looking. I must admit, I have a soft spot for the P-61! Great job one and all. Russell
Jessie_C
_VISITCOMMUNITY
British Columbia, Canada
Joined: September 03, 2009
KitMaker: 6,965 posts
AeroScale: 6,247 posts
Posted: Tuesday, June 18, 2013 - 05:14 PM UTC
We've had a great crop of wonderful models come out of this campaign!


Quoted Text

Didn't Shep Paine make one of his incredible dioramas with a Black Widow getting maintenance done to it???



Yes he did. It may be seen along with several others done for Monogram at around the same time on this page.
amegan
#243
_VISITCOMMUNITY
England - North East, United Kingdom
Joined: March 21, 2008
KitMaker: 996 posts
AeroScale: 915 posts
Posted: Tuesday, June 18, 2013 - 05:39 PM UTC
That was my thinking, and why I left the cowls loose. Could be a job for a future campaign. Great campaign here with some beautiful builds.
MichaelSatin
Staff MemberCampaigns Administrator
AEROSCALE
_VISITCOMMUNITY
Colorado, United States
Joined: January 19, 2008
KitMaker: 3,909 posts
AeroScale: 2,904 posts
Posted: Wednesday, June 19, 2013 - 12:39 AM UTC
Now we're getting there! Pete, Andrew, Lap: excellent work! Looks like a couple more are almost there. I expect to see a great gallery!

Michael
rochaped
_VISITCOMMUNITY
Lisboa, Portugal
Joined: August 27, 2010
KitMaker: 679 posts
AeroScale: 669 posts
Posted: Thursday, June 20, 2013 - 10:44 AM UTC
Hi

Been awhile since i last posted on this campaign, but i believe i can still manage to finish my bird on time.

Here are a few pics, interiors are almost there, so i anticipate a week or so to close fuselage and assemble wings & engines.

[url=http://www.flickr.com/people/rochinhas4/]rochaped38


[url=http://www.flickr.com/people/rochinhas4/]rochaped38

[url=http://www.flickr.com/people/rochinhas4/]rochaped38


[url=http://www.flickr.com/people/rochinhas4/]rochaped38

Cheers

Pedro
amegan
#243
_VISITCOMMUNITY
England - North East, United Kingdom
Joined: March 21, 2008
KitMaker: 996 posts
AeroScale: 915 posts
Posted: Thursday, June 20, 2013 - 11:05 AM UTC
Nice work
GhostHawk
_VISITCOMMUNITY
Cordoba, Argentina
Joined: January 27, 2011
KitMaker: 268 posts
AeroScale: 264 posts
Posted: Friday, June 21, 2013 - 09:31 AM UTC
Hello again,

Two updates in one month, I do not know for you, but for me it's a record...

Muchas Gracias,Jessica...! (Thanks You Very Much, Jessica)

Thanks You Peter, the steel tubing frame was very enjoyable challenge for me...!

Pedro, your update looks very good...!!!

Here we go whit the pics...


Reworking areas...


Same Small solutions whit somebody else ideas... Thanks


Finally we have got wings...


Asymetrical legs...!!! Whyyyyhhh...!!??
The Putty is curing meanwhile...

See you late
tinbanger
_VISITCOMMUNITY
Ontario, Canada
Joined: February 04, 2008
KitMaker: 2,507 posts
AeroScale: 1,814 posts
Posted: Tuesday, June 25, 2013 - 11:32 AM UTC
Here is my completed entry for this campaign:-
The last purposely built night fighter for the RAF.
This is a 1:72 Czech Master Resin De Havilland Venom NF 2.
DH Venom NF 2, WL830.No.23 Squadron RAF, Coltishall, 1955


Thank's for a great campaign!