Air Campaigns
Want to start or join a group build? This is where to start.
OFFICIAL: Schwalbe II
Torpon
_VISITCOMMUNITY
Spain / España
Joined: February 28, 2012
KitMaker: 103 posts
AeroScale: 102 posts
Posted: Tuesday, July 21, 2020 - 04:47 AM UTC
Joe,

I am really sorry about your accident, I hope you get better soon.

Carlos
Bigrip74
_VISITCOMMUNITY
Texas, United States
Joined: February 22, 2008
KitMaker: 5,026 posts
AeroScale: 2,811 posts
Posted: Tuesday, July 21, 2020 - 06:49 AM UTC

Quoted Text

Joe,

I am really sorry about your accident, I hope you get better soon.

Carlos



"DITTO" Best wishes and a speedy recovery.

Bob
Antilles
_VISITCOMMUNITY
Nordrhein-Westfalen, Germany
Joined: March 22, 2015
KitMaker: 671 posts
AeroScale: 614 posts
Posted: Wednesday, July 22, 2020 - 01:07 AM UTC
Joe:
This is really sad to hear. I hope You will recover well and fast. Best wishes!

Oliver
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
_VISITCOMMUNITY
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,156 posts
AeroScale: 3,756 posts
Posted: Monday, July 27, 2020 - 05:21 PM UTC
Stage 2 of the paint process with RLM65 on the underside (using Gunze Aqueous Hobby Colour H67 thinned with MLT).



I built it up slowly from the black primer base with some heavier and some lighter areas to simulate a light bit of fading.

Cheers, D
BlackWidow
_VISITCOMMUNITY
European Union
Joined: August 09, 2009
KitMaker: 1,732 posts
AeroScale: 1,336 posts
Posted: Monday, July 27, 2020 - 07:21 PM UTC
Good work, Damian but your turntable looks far too clean!
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
_VISITCOMMUNITY
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,156 posts
AeroScale: 3,756 posts
Posted: Monday, July 27, 2020 - 08:14 PM UTC

Quoted Text

Good work, Damian but your turntable looks far too clean!



Thanks Torsten. The crew chief has severe OCD!

Cheers, D
Antilles
_VISITCOMMUNITY
Nordrhein-Westfalen, Germany
Joined: March 22, 2015
KitMaker: 671 posts
AeroScale: 614 posts
Posted: Tuesday, July 28, 2020 - 01:47 AM UTC
Carlos:
Excellent built and painted model. Congratulation!

Damian:
The amount of fading looks spot on.

I finished my Schwalbe so far




and put it in its blister



next to the bird of swallow campaign 1


Have fun.

Oliver
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
_VISITCOMMUNITY
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,156 posts
AeroScale: 3,756 posts
Posted: Tuesday, July 28, 2020 - 02:58 AM UTC
Lovely build Oliver, and a really nice little scene inside the workshop. Well done and congratulations on getting finished!

Cheers, D
eMan
#298
_VISITCOMMUNITY
Hong Kong S.A.R. / 繁體
Joined: August 08, 2002
KitMaker: 1,182 posts
AeroScale: 351 posts
Posted: Friday, July 31, 2020 - 01:40 AM UTC
Here is my entry, Dragon 1/48 Me 262A-2a/U2 Jet Bomber.


GazzaS
#424
_VISITCOMMUNITY
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
AeroScale: 1,938 posts
Posted: Friday, July 31, 2020 - 11:00 AM UTC
D,
Great to see the underside looking clean and neat.

EMan,
Thank you for your submitted start photos. Looking forward to seeing some Dragon plastic.

Gaz
GazzaS
#424
_VISITCOMMUNITY
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
AeroScale: 1,938 posts
Posted: Friday, July 31, 2020 - 11:01 AM UTC
Oliver,
Congratulations on your completion! She is a fine looking Schwalbe, and I'm glad she's not alone in that fantastic hangar.

Das is der Hammer!

Gaz
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
_VISITCOMMUNITY
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,156 posts
AeroScale: 3,756 posts
Posted: Sunday, August 02, 2020 - 01:06 AM UTC
Stage 3 of the paint process, the light green. I used Tamiya XF-5 acrylic, thinned about 50/50 with MLT and sprayed lightly over the black primer to build the opacity slowly.




I sprayed a light random pattern on the areas where the darker green will go to give some variety to the undercoat and will use the same process to build up the colour and hopefully give a nice varied finish.

Cheers, D
GazzaS
#424
_VISITCOMMUNITY
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
AeroScale: 1,938 posts
Posted: Sunday, August 02, 2020 - 04:55 PM UTC
Interesting looking technique, D. Can't wait to see how it turns out.

Gaz
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Wednesday, August 05, 2020 - 12:44 AM UTC
Some fantastic finishes here

Raj Super clean work

Carlos a nice result, even if it was a difficult gestation period

Joe really sorry to hear of your accident-best wishes for a speedy recovery!

Oliver great work on that green

Damian that colour looks great

So, over to my build of Airfix's 1/72 effort... Ready for paint... let's hope I don't knock off any pointy bits...



I've used the landing gear doors to mask off the bays... these will be removed and discarded later on to allow the landing gear to be added



Let's see if I'm any good at painting Luftwaffe mottle
Torpon
_VISITCOMMUNITY
Spain / España
Joined: February 28, 2012
KitMaker: 103 posts
AeroScale: 102 posts
Posted: Wednesday, August 05, 2020 - 02:59 AM UTC
Russel,

Really neat build, enjoy the painting.

(I broke the antenna in mine twice, I had to replace it by stretched sprue.)

Carlos.
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Wednesday, August 05, 2020 - 09:22 AM UTC

Quoted Text

Russel,

Really neat build, enjoy the painting.

(I broke the antenna in mine twice, I had to replace it by stretched sprue.)

Carlos.



Thank you Carlos This is always the most exciting, but also the most stressful part of the build... No doubt I'll find some way to break off one of those pointy bits
GazzaS
#424
_VISITCOMMUNITY
Queensland, Australia
Joined: April 23, 2015
KitMaker: 4,648 posts
AeroScale: 1,938 posts
Posted: Wednesday, August 05, 2020 - 10:13 AM UTC
Looking good, Russell! I look forward to seeing your mottle.
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
_VISITCOMMUNITY
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,156 posts
AeroScale: 3,756 posts
Posted: Wednesday, August 05, 2020 - 11:06 AM UTC
Nice progress Russ, can't wait to see the paint job!

Cheers, D
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Wednesday, August 05, 2020 - 11:26 AM UTC
Gaz, D Thanks guys...

I'm somewhat apprehensive I'll do as half a decent job as the ones done here so far fingers crossed
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
_VISITCOMMUNITY
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,156 posts
AeroScale: 3,756 posts
Posted: Wednesday, August 05, 2020 - 01:30 PM UTC
Main paint work is complete! I used Gunze Aqueous Hobby Color H423 (RLM83) for the Dark Green, again thinned with about 50% MLT. The fuselage was sprayed freehand, the splinter on the wings I used an old business card held loosely in place to get a harder edge.
The difference in sheen level is interesting between the Tamiya and Gunze products.




Next up is decals.

Cheers, D
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Wednesday, August 05, 2020 - 10:39 PM UTC
fantastic work D

Now, it seems in all the excitement, that I don't actually have the correct colours on hand to paint my Schwalbe!

Oh dear, the dilemma!

I've been meaning to slowly transition away from enamels to acrylics and now find myself staring down the barrel of whether or not to spray acrylics over the enamels that have already gone down for pre-shading...

Has anyone else done this?
AussieReg
Staff MemberAssociate Editor
AUTOMODELER
#007
_VISITCOMMUNITY
Victoria, Australia
Joined: June 09, 2009
KitMaker: 8,156 posts
AeroScale: 3,756 posts
Posted: Wednesday, August 05, 2020 - 10:45 PM UTC
Russ, if you spray it in light layers and build it up you should be ok. If you go on wet you risk lifting the enamel.

Cheers, D
RussellE
#306
_VISITCOMMUNITY
Victoria, Australia
Joined: June 27, 2010
KitMaker: 3,959 posts
AeroScale: 598 posts
Posted: Wednesday, August 05, 2020 - 10:56 PM UTC
It's a bit of a minefield out there with all the different types of Acrylics on offer... what do folks use for thinners? Does any generic acrylic thinner work for any brand of paint? sorry if this is
eMan
#298
_VISITCOMMUNITY
Hong Kong S.A.R. / 繁體
Joined: August 08, 2002
KitMaker: 1,182 posts
AeroScale: 351 posts
Posted: Thursday, August 06, 2020 - 01:42 AM UTC
Progress update.




bomber14
_VISITCOMMUNITY
New Jersey, United States
Joined: February 02, 2015
KitMaker: 330 posts
AeroScale: 286 posts
Posted: Thursday, August 06, 2020 - 09:56 AM UTC
Hi guys. thank you for all your well wishes and concern. i am going home tomorrow from my rehab facility.

i am really impressed with the builds here raj, carlos, oliver you cammo looks great. damian very nice work so far, i like the subtleness of you paint scheme.
wish i could finish mine but right now even though i am missing working at my bench at the same time i don't really feel like it. but i am enjoying seeing all the builds going on here. this has been a very good campaign.